Emplacement de mise à jour

Espace de noms: microsoft.graph

Mettez à jour les propriétés de l’objet de lieu qui peut être un bâtiment, un étage, une section, un bureau, une salle, un espace de travail ou une liste de salles. Vous pouvez identifier le lieu en spécifiant la propriété id .

Cette API est disponible dans les déploiements cloud nationaux suivants.

Service global	Gouvernement américain L4	Gouvernement américain L5 (DOD)	Chine exploitée par 21Vianet
✅	✅	✅	✅

Autorisations

Choisissez l’autorisation ou les autorisations marquées comme étant les moins privilégiées pour cette API. Utilisez une ou plusieurs autorisations privilégiées uniquement si votre application en a besoin. Pour plus d’informations sur les autorisations déléguées et d’application, voir Types d’autorisations. Pour en savoir plus sur ces autorisations, consultez la référence des autorisations.

Type d’autorisation	Autorisations les moins privilégiées	Autorisations à privilèges plus élevés
Déléguée (compte professionnel ou scolaire)	Place.ReadWrite.All	Non disponible.
Déléguée (compte Microsoft personnel)	Non prise en charge.	Non prise en charge.
Application	Place.ReadWrite.All	Non disponible.

Importante

Pour l’accès délégué à l’aide de comptes professionnels ou scolaires, l’utilisateur connecté doit disposer d’un rôle Microsoft Entra pris en charge ou d’un rôle personnalisé qui accorde les autorisations requises pour cette opération. Administrateur Exchange est le rôle le moins privilégié pris en charge pour cette opération. Dans Microsoft Entra ID, les rôles administratifs peuvent être attribués directement à des utilisateurs individuels ou via des groupes assignables à des rôles ; d’autres groupes ne peuvent pas être utilisés pour les attributions de rôles. En revanche, le Centre d’administration Microsoft 365 prend en charge l’attribution de rôles administratifs, soit directement aux utilisateurs, soit par le biais de groupes.

Lorsque vous utilisez des autorisations d’application, vous devez configurer le rôle requis TenantPlacesManagement (pour gérer les Places) et le rôle (pour gérer les utilisateurs et les MailRecipient boîtes aux lettres). Pour plus d’informations sur la configuration de ces rôles, consultez Access Control basées sur les rôles pour les applications dans Exchange Online.

Requête HTTP

PATCH /places/{id}

En-têtes de demande

Nom	Description
Autorisation	Porteur {token}. Obligatoire. En savoir plus sur l’authentification et les autorisations.
Content-Type	application/json. Obligatoire.

Corps de la demande

Dans le corps de la demande, fournissez uniquement les valeurs des propriétés à mettre à jour. Les propriétés existantes qui ne sont pas incluses dans le corps de la demande conservent leurs valeurs précédentes ou sont recalculées en fonction des modifications apportées à d’autres valeurs de propriété.

Le tableau suivant spécifie les propriétés qui peuvent être mises à jour.

Une seule instance d’une ressource de lieu peut être mise à jour à la fois. Dans le corps de la demande, utilisez @odata.type pour spécifier le type de lieu et inclure les propriétés à mettre à jour.

Remarque

Vous ne pouvez pas utiliser cette API pour mettre à jour l’id, placeId, emailAddress, displayName ou bookingType d’un objet place .

Propriété	Type	Description
address	physicalAddress	Adresse physique du lieu, y compris la rue, la ville, l’état, le pays ou la région et le code postal. Facultatif.
geoCoordinates	outlookGeoCoordinates	Spécifie l’emplacement du lieu en coordonnées de latitude, de longitude et (éventuellement) d’altitude. Facultatif.
isWheelChairAccessible	Booléen	Indique si l’endroit est accessible aux fauteuils roulants. Obligatoire.
étiquette	String	Description du lieu définie par l’utilisateur. Facultatif.
parentId	String	ID d’un emplacement parent. Facultatif.
phone	String	Numéro de téléphone de l’endroit. Facultatif.
étiquettes	String collection	Étiquettes personnalisées associées à l’emplacement pour la catégorisation ou le filtrage. Obligatoire.

Réponse

En cas de réussite, cette méthode renvoie un code de 200 OK réponse et un objet PLACE mis à jour dans le corps de la réponse.

Exemples

Exemple 1 : mettre à jour un bâtiment

L’exemple suivant montre comment mettre à jour un objet de génération .

Demande

L’exemple suivant illustre une demande.

PATCH https://graph.microsoft.com/v1.0/places/e18a8e21-0494-4296-a5bc-f848dba2740d
Content-Type: application/json

{
  "@odata.type": "microsoft.graph.building",
  "tags": ["most popular building"]
}


// Code snippets are only available for the latest version. Current version is 5.x

// Dependencies
using Microsoft.Graph.Models;

var requestBody = new Building
{
	OdataType = "microsoft.graph.building",
	Tags = new List<string>
	{
		"most popular building",
	},
};

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=csharp
var result = await graphClient.Places["{place-id}"].PatchAsync(requestBody);



// Code snippets are only available for the latest major version. Current major version is $v1.*

// Dependencies
import (
	  "context"
	  msgraphsdk "github.com/microsoftgraph/msgraph-sdk-go"
	  graphmodels "github.com/microsoftgraph/msgraph-sdk-go/models"
	  //other-imports
)

requestBody := graphmodels.NewPlace()
tags := []string {
	"most popular building",
}
requestBody.SetTags(tags)

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=go
places, err := graphClient.Places().ByPlaceId("place-id").Patch(context.Background(), requestBody, nil)


// Code snippets are only available for the latest version. Current version is 6.x

GraphServiceClient graphClient = new GraphServiceClient(requestAdapter);

Building place = new Building();
place.setOdataType("microsoft.graph.building");
LinkedList<String> tags = new LinkedList<String>();
tags.add("most popular building");
place.setTags(tags);
Place result = graphClient.places().byPlaceId("{place-id}").patch(place);


const options = {
	authProvider,
};

const client = Client.init(options);

const place = {
  '@odata.type': 'microsoft.graph.building',
  tags: ['most popular building']
};

await client.api('/places/e18a8e21-0494-4296-a5bc-f848dba2740d')
	.update(place);


<?php
use Microsoft\Graph\GraphServiceClient;
use Microsoft\Graph\Generated\Models\Building;


$graphServiceClient = new GraphServiceClient($tokenRequestContext, $scopes);

$requestBody = new Building();
$requestBody->setOdataType('microsoft.graph.building');
$requestBody->setTags(['most popular building', 	]);

$result = $graphServiceClient->places()->byPlaceId('place-id')->patch($requestBody)->wait();


Import-Module Microsoft.Graph.Calendar

$params = @{
	"@odata.type" = "microsoft.graph.building"
	tags = @(
	"most popular building"
)
}

Update-MgPlace -PlaceId $placeId -BodyParameter $params


# Code snippets are only available for the latest version. Current version is 1.x
from msgraph import GraphServiceClient
from msgraph.generated.models.building import Building
# To initialize your graph_client, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=python
request_body = Building(
	odata_type = "microsoft.graph.building",
	tags = [
		"most popular building",
	],
)

result = await graph_client.places.by_place_id('place-id').patch(request_body)

Réponse

L’exemple suivant illustre la réponse.

HTTP/1.1 200 OK
Content-Type: application/json

{
  "@odata.type": "#microsoft.graph.building",
  "id": "e18a8e21-0494-4296-a5bc-f848dba2740d",
  "placeId": "e18a8e21-0494-4296-a5bc-f848dba2740d",
  "displayName": "MRS",
  "phone": "8801733457",
  "tags": [
    "most popular building"
  ],
  "isWheelChairAccessible": true,
  "label": "this is a building not open to all",
  "hasWiFi": false,
  "geoCoordinates": {
    "latitude": 31.2513263,
    "longitude": 121.3912291,
    "accuracy": null,
    "altitude": null,
    "altitudeAccuracy": null
  },
  "resourceLinks": []
}

Exemple 2 : mettre à jour un plancher

L’exemple suivant montre comment mettre à jour un objet floor .

Demande

L’exemple suivant illustre une demande.

PATCH https://graph.microsoft.com/v1.0/places/c64205d0-1a2d-4cfe-9012-3f5d668d28ea
Content-Type: application/json

{
  "@odata.type": "microsoft.graph.floor",
  "isWheelChairAccessible": true,
  "sortOrder": 2
}


// Code snippets are only available for the latest version. Current version is 5.x

// Dependencies
using Microsoft.Graph.Models;

var requestBody = new Floor
{
	OdataType = "microsoft.graph.floor",
	IsWheelChairAccessible = true,
	SortOrder = 2,
};

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=csharp
var result = await graphClient.Places["{place-id}"].PatchAsync(requestBody);



// Code snippets are only available for the latest major version. Current major version is $v1.*

// Dependencies
import (
	  "context"
	  msgraphsdk "github.com/microsoftgraph/msgraph-sdk-go"
	  graphmodels "github.com/microsoftgraph/msgraph-sdk-go/models"
	  //other-imports
)

requestBody := graphmodels.NewPlace()
isWheelChairAccessible := true
requestBody.SetIsWheelChairAccessible(&isWheelChairAccessible) 
sortOrder := int32(2)
requestBody.SetSortOrder(&sortOrder) 

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=go
places, err := graphClient.Places().ByPlaceId("place-id").Patch(context.Background(), requestBody, nil)


// Code snippets are only available for the latest version. Current version is 6.x

GraphServiceClient graphClient = new GraphServiceClient(requestAdapter);

Floor place = new Floor();
place.setOdataType("microsoft.graph.floor");
place.setIsWheelChairAccessible(true);
place.setSortOrder(2);
Place result = graphClient.places().byPlaceId("{place-id}").patch(place);


const options = {
	authProvider,
};

const client = Client.init(options);

const place = {
  '@odata.type': 'microsoft.graph.floor',
  isWheelChairAccessible: true,
  sortOrder: 2
};

await client.api('/places/c64205d0-1a2d-4cfe-9012-3f5d668d28ea')
	.update(place);


<?php
use Microsoft\Graph\GraphServiceClient;
use Microsoft\Graph\Generated\Models\Floor;


$graphServiceClient = new GraphServiceClient($tokenRequestContext, $scopes);

$requestBody = new Floor();
$requestBody->setOdataType('microsoft.graph.floor');
$requestBody->setIsWheelChairAccessible(true);
$requestBody->setSortOrder(2);

$result = $graphServiceClient->places()->byPlaceId('place-id')->patch($requestBody)->wait();


Import-Module Microsoft.Graph.Calendar

$params = @{
	"@odata.type" = "microsoft.graph.floor"
	isWheelChairAccessible = $true
	sortOrder = 
}

Update-MgPlace -PlaceId $placeId -BodyParameter $params


# Code snippets are only available for the latest version. Current version is 1.x
from msgraph import GraphServiceClient
from msgraph.generated.models.floor import Floor
# To initialize your graph_client, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=python
request_body = Floor(
	odata_type = "microsoft.graph.floor",
	is_wheel_chair_accessible = True,
	sort_order = 2,
)

result = await graph_client.places.by_place_id('place-id').patch(request_body)

Réponse

L’exemple suivant illustre la réponse.

HTTP/1.1 200 OK
Content-Type: application/json

{
  "@odata.type": "#microsoft.graph.floor",
  "id": "c64205d0-1a2d-4cfe-9012-3f5d668d28ea",
  "placeId": "c64205d0-1a2d-4cfe-9012-3f5d668d28ea",
  "displayName": "Floor X",
  "parentId": "be7b53f1-7c63-4533-91d4-52c3ca856afb",
  "isWheelChairAccessible": true,
  "sortOrder": 2,
  "geoCoordinates": {
    "latitude": 0.0,
    "longitude": 0.0,
    "accuracy": null,
    "altitude": null,
    "altitudeAccuracy": null
  }
}

Exemple 3 : Mettre à jour une section

L’exemple suivant montre comment mettre à jour un objet de section .

Demande

L’exemple suivant illustre une demande.

PATCH https://graph.microsoft.com/v1.0/places/3e7160bb-75da-4456-ab3c-5ee061f4611a
Content-Type: application/json

{
  "@odata.type": "microsoft.graph.section",
  "label": "discuss area"
}


// Code snippets are only available for the latest version. Current version is 5.x

// Dependencies
using Microsoft.Graph.Models;

var requestBody = new Section
{
	OdataType = "microsoft.graph.section",
	Label = "discuss area",
};

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=csharp
var result = await graphClient.Places["{place-id}"].PatchAsync(requestBody);



// Code snippets are only available for the latest major version. Current major version is $v1.*

// Dependencies
import (
	  "context"
	  msgraphsdk "github.com/microsoftgraph/msgraph-sdk-go"
	  graphmodels "github.com/microsoftgraph/msgraph-sdk-go/models"
	  //other-imports
)

requestBody := graphmodels.NewPlace()
label := "discuss area"
requestBody.SetLabel(&label) 

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=go
places, err := graphClient.Places().ByPlaceId("place-id").Patch(context.Background(), requestBody, nil)


// Code snippets are only available for the latest version. Current version is 6.x

GraphServiceClient graphClient = new GraphServiceClient(requestAdapter);

Section place = new Section();
place.setOdataType("microsoft.graph.section");
place.setLabel("discuss area");
Place result = graphClient.places().byPlaceId("{place-id}").patch(place);


const options = {
	authProvider,
};

const client = Client.init(options);

const place = {
  '@odata.type': 'microsoft.graph.section',
  label: 'discuss area'
};

await client.api('/places/3e7160bb-75da-4456-ab3c-5ee061f4611a')
	.update(place);


<?php
use Microsoft\Graph\GraphServiceClient;
use Microsoft\Graph\Generated\Models\Section;


$graphServiceClient = new GraphServiceClient($tokenRequestContext, $scopes);

$requestBody = new Section();
$requestBody->setOdataType('microsoft.graph.section');
$requestBody->setLabel('discuss area');

$result = $graphServiceClient->places()->byPlaceId('place-id')->patch($requestBody)->wait();


Import-Module Microsoft.Graph.Calendar

$params = @{
	"@odata.type" = "microsoft.graph.section"
	label = "discuss area"
}

Update-MgPlace -PlaceId $placeId -BodyParameter $params


# Code snippets are only available for the latest version. Current version is 1.x
from msgraph import GraphServiceClient
from msgraph.generated.models.section import Section
# To initialize your graph_client, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=python
request_body = Section(
	odata_type = "microsoft.graph.section",
	label = "discuss area",
)

result = await graph_client.places.by_place_id('place-id').patch(request_body)

Réponse

L’exemple suivant illustre la réponse.

HTTP/1.1 200 OK
Content-Type: application/json

{
  "@odata.type": "#microsoft.graph.section",
  "id": "3e7160bb-75da-4456-ab3c-5ee061f4611a",
  "placeId": "3e7160bb-75da-4456-ab3c-5ee061f4611a",
  "displayName": "section_1",
  "parentId": "e30d4c71-95bf-4576-be4f-b6b7a8d2eeb7",
  "isWheelChairAccessible": false,
  "label": "discuss area"
}

Exemple 4 : Mettre à jour un bureau

L’exemple suivant montre comment mettre à jour un objet de bureau .

Demande

L’exemple suivant illustre une demande.

PATCH https://graph.microsoft.com/v1.0/places/530f7900-8063-4daf-9cc1-168cb3ac26e9
Content-Type: application/json

{
  "@odata.type": "microsoft.graph.desk",
  "mode": {
    "@odata.type": "microsoft.graph.dropInPlaceMode"
  }
}


// Code snippets are only available for the latest version. Current version is 5.x

// Dependencies
using Microsoft.Graph.Models;

var requestBody = new Desk
{
	OdataType = "microsoft.graph.desk",
	Mode = new DropInPlaceMode
	{
		OdataType = "microsoft.graph.dropInPlaceMode",
	},
};

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=csharp
var result = await graphClient.Places["{place-id}"].PatchAsync(requestBody);



// Code snippets are only available for the latest major version. Current major version is $v1.*

// Dependencies
import (
	  "context"
	  msgraphsdk "github.com/microsoftgraph/msgraph-sdk-go"
	  graphmodels "github.com/microsoftgraph/msgraph-sdk-go/models"
	  //other-imports
)

requestBody := graphmodels.NewPlace()
mode := graphmodels.NewDropInPlaceMode()
requestBody.SetMode(mode)

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=go
places, err := graphClient.Places().ByPlaceId("place-id").Patch(context.Background(), requestBody, nil)


// Code snippets are only available for the latest version. Current version is 6.x

GraphServiceClient graphClient = new GraphServiceClient(requestAdapter);

Desk place = new Desk();
place.setOdataType("microsoft.graph.desk");
DropInPlaceMode mode = new DropInPlaceMode();
mode.setOdataType("microsoft.graph.dropInPlaceMode");
place.setMode(mode);
Place result = graphClient.places().byPlaceId("{place-id}").patch(place);


const options = {
	authProvider,
};

const client = Client.init(options);

const place = {
  '@odata.type': 'microsoft.graph.desk',
  mode: {
    '@odata.type': 'microsoft.graph.dropInPlaceMode'
  }
};

await client.api('/places/530f7900-8063-4daf-9cc1-168cb3ac26e9')
	.update(place);


<?php
use Microsoft\Graph\GraphServiceClient;
use Microsoft\Graph\Generated\Models\Desk;
use Microsoft\Graph\Generated\Models\DropInPlaceMode;


$graphServiceClient = new GraphServiceClient($tokenRequestContext, $scopes);

$requestBody = new Desk();
$requestBody->setOdataType('microsoft.graph.desk');
$mode = new DropInPlaceMode();
$mode->setOdataType('microsoft.graph.dropInPlaceMode');
$requestBody->setMode($mode);

$result = $graphServiceClient->places()->byPlaceId('place-id')->patch($requestBody)->wait();


Import-Module Microsoft.Graph.Calendar

$params = @{
	"@odata.type" = "microsoft.graph.desk"
	mode = @{
		"@odata.type" = "microsoft.graph.dropInPlaceMode"
	}
}

Update-MgPlace -PlaceId $placeId -BodyParameter $params


# Code snippets are only available for the latest version. Current version is 1.x
from msgraph import GraphServiceClient
from msgraph.generated.models.desk import Desk
from msgraph.generated.models.drop_in_place_mode import DropInPlaceMode
# To initialize your graph_client, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=python
request_body = Desk(
	odata_type = "microsoft.graph.desk",
	mode = DropInPlaceMode(
		odata_type = "microsoft.graph.dropInPlaceMode",
	),
)

result = await graph_client.places.by_place_id('place-id').patch(request_body)

Réponse

L’exemple suivant illustre la réponse.

HTTP/1.1 200 OK
Content-Type: application/json

{
  "@odata.type": "#microsoft.graph.desk",
  "id": "530f7900-8063-4daf-9cc1-168cb3ac26e9",
  "placeId": "530f7900-8063-4daf-9cc1-168cb3ac26e9",
  "displayName": "desk 5",
  "parentId": "ca163ae1-14a3-4e2a-8a97-5f82d672186f",
  "isWheelChairAccessible": true,
  "mailboxDetails": {
    "externalDirectoryObjectId": "04c6ff74-9268-41aa-96b5-5637d9f039bf",
    "emailAddress": "desk5ca86f9b61753443541750@contoso.com"
  },
  "mode": {
    "@odata.type": "#microsoft.graph.dropInPlaceMode"
  }
}

Exemple 5 : Mise à jour d’une salle

L’exemple suivant montre comment mettre à jour un objet salle .

Demande

L’exemple suivant illustre une demande.

PATCH https://graph.microsoft.com/v1.0/places/cf100@contoso.com
Content-Type: application/json

{
  "@odata.type": "microsoft.graph.room",
  "nickname": "Conf Room",
  "building": "1",
  "label": "100",
  "capacity": 50,
  "isWheelChairAccessible": false
}


// Code snippets are only available for the latest version. Current version is 5.x

// Dependencies
using Microsoft.Graph.Models;

var requestBody = new Room
{
	OdataType = "microsoft.graph.room",
	Nickname = "Conf Room",
	Building = "1",
	Label = "100",
	Capacity = 50,
	IsWheelChairAccessible = false,
};

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=csharp
var result = await graphClient.Places["{place-id}"].PatchAsync(requestBody);



// Code snippets are only available for the latest major version. Current major version is $v1.*

// Dependencies
import (
	  "context"
	  msgraphsdk "github.com/microsoftgraph/msgraph-sdk-go"
	  graphmodels "github.com/microsoftgraph/msgraph-sdk-go/models"
	  //other-imports
)

requestBody := graphmodels.NewPlace()
nickname := "Conf Room"
requestBody.SetNickname(&nickname) 
building := "1"
requestBody.SetBuilding(&building) 
label := "100"
requestBody.SetLabel(&label) 
capacity := int32(50)
requestBody.SetCapacity(&capacity) 
isWheelChairAccessible := false
requestBody.SetIsWheelChairAccessible(&isWheelChairAccessible) 

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=go
places, err := graphClient.Places().ByPlaceId("place-id").Patch(context.Background(), requestBody, nil)


// Code snippets are only available for the latest version. Current version is 6.x

GraphServiceClient graphClient = new GraphServiceClient(requestAdapter);

Room place = new Room();
place.setOdataType("microsoft.graph.room");
place.setNickname("Conf Room");
place.setBuilding("1");
place.setLabel("100");
place.setCapacity(50);
place.setIsWheelChairAccessible(false);
Place result = graphClient.places().byPlaceId("{place-id}").patch(place);


const options = {
	authProvider,
};

const client = Client.init(options);

const place = {
  '@odata.type': 'microsoft.graph.room',
  nickname: 'Conf Room',
  building: '1',
  label: '100',
  capacity: 50,
  isWheelChairAccessible: false
};

await client.api('/places/cf100@contoso.com')
	.update(place);


<?php
use Microsoft\Graph\GraphServiceClient;
use Microsoft\Graph\Generated\Models\Room;


$graphServiceClient = new GraphServiceClient($tokenRequestContext, $scopes);

$requestBody = new Room();
$requestBody->setOdataType('microsoft.graph.room');
$requestBody->setNickname('Conf Room');
$requestBody->setBuilding('1');
$requestBody->setLabel('100');
$requestBody->setCapacity(50);
$requestBody->setIsWheelChairAccessible(false);

$result = $graphServiceClient->places()->byPlaceId('place-id')->patch($requestBody)->wait();


Import-Module Microsoft.Graph.Calendar

$params = @{
	"@odata.type" = "microsoft.graph.room"
	nickname = "Conf Room"
	building = "1"
	label = "100"
	capacity = 
	isWheelChairAccessible = $false
}

Update-MgPlace -PlaceId $placeId -BodyParameter $params


# Code snippets are only available for the latest version. Current version is 1.x
from msgraph import GraphServiceClient
from msgraph.generated.models.room import Room
# To initialize your graph_client, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=python
request_body = Room(
	odata_type = "microsoft.graph.room",
	nickname = "Conf Room",
	building = "1",
	label = "100",
	capacity = 50,
	is_wheel_chair_accessible = False,
)

result = await graph_client.places.by_place_id('place-id').patch(request_body)

Réponse

L’exemple suivant illustre la réponse.

HTTP/1.1 200 OK
Content-Type: application/json

{
  "@odata.context": "https://graph.microsoft.com/v1.0/$metadata#places/$entity",
  "@odata.type": "#microsoft.graph.room",
  "id": "3162F1E1-C4C0-604B-51D8-91DA78989EB1",
  "emailAddress": "cf100@contoso.com",
  "displayName": "Conf Room 100",
  "address": {
    "street": "4567 Main Street",
    "city": "Buffalo",
    "state": "NY",
    "postalCode": "98052",
    "countryOrRegion": "US"
  },
  "geoCoordinates": {
    "latitude": 47.0,
    "longitude": -122.0
  },
  "phone": "555-555-0100",
  "nickname": "Conf Room",
  "label": "100",
  "capacity": 50,
  "building": "1",
  "floorLabel": "1P",
  "floorNumber": 1,
  "isWheelChairAccessible": false,
  "bookingType": "standard",
  "tags": [
    "bean bags"
  ],
  "audioDeviceName": null,
  "videoDeviceName": null,
  "displayDeviceName": "surface hub",
  "placeId": "080ed1a0-7b54-4995-85a5-eeec751786f5"
}

Exemple 6 : Mettre à jour un espace de travail

L’exemple suivant montre comment mettre à jour un objet d’espace de travail .

Demande

L’exemple suivant illustre une demande.

PATCH https://graph.microsoft.com/v1.0/places/ws100@contoso.com
Content-Type: application/json

{
  "@odata.type": "microsoft.graph.workspace",
  "nickname": "Conf Room",
  "building": "1",
  "label": "100",
  "capacity": 50,
  "isWheelChairAccessible": false
}


// Code snippets are only available for the latest version. Current version is 5.x

// Dependencies
using Microsoft.Graph.Models;

var requestBody = new Workspace
{
	OdataType = "microsoft.graph.workspace",
	Nickname = "Conf Room",
	Label = "100",
	Capacity = 50,
	IsWheelChairAccessible = false,
	AdditionalData = new Dictionary<string, object>
	{
		{
			"building" , "1"
		},
	},
};

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=csharp
var result = await graphClient.Places["{place-id}"].PatchAsync(requestBody);



// Code snippets are only available for the latest major version. Current major version is $v1.*

// Dependencies
import (
	  "context"
	  msgraphsdk "github.com/microsoftgraph/msgraph-sdk-go"
	  graphmodels "github.com/microsoftgraph/msgraph-sdk-go/models"
	  //other-imports
)

requestBody := graphmodels.NewPlace()
nickname := "Conf Room"
requestBody.SetNickname(&nickname) 
label := "100"
requestBody.SetLabel(&label) 
capacity := int32(50)
requestBody.SetCapacity(&capacity) 
isWheelChairAccessible := false
requestBody.SetIsWheelChairAccessible(&isWheelChairAccessible) 
additionalData := map[string]interface{}{
	"building" : "1", 
}
requestBody.SetAdditionalData(additionalData)

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=go
places, err := graphClient.Places().ByPlaceId("place-id").Patch(context.Background(), requestBody, nil)


// Code snippets are only available for the latest version. Current version is 6.x

GraphServiceClient graphClient = new GraphServiceClient(requestAdapter);

Workspace place = new Workspace();
place.setOdataType("microsoft.graph.workspace");
place.setNickname("Conf Room");
place.setLabel("100");
place.setCapacity(50);
place.setIsWheelChairAccessible(false);
HashMap<String, Object> additionalData = new HashMap<String, Object>();
additionalData.put("building", "1");
place.setAdditionalData(additionalData);
Place result = graphClient.places().byPlaceId("{place-id}").patch(place);


const options = {
	authProvider,
};

const client = Client.init(options);

const place = {
  '@odata.type': 'microsoft.graph.workspace',
  nickname: 'Conf Room',
  building: '1',
  label: '100',
  capacity: 50,
  isWheelChairAccessible: false
};

await client.api('/places/ws100@contoso.com')
	.update(place);


<?php
use Microsoft\Graph\GraphServiceClient;
use Microsoft\Graph\Generated\Models\Workspace;


$graphServiceClient = new GraphServiceClient($tokenRequestContext, $scopes);

$requestBody = new Workspace();
$requestBody->setOdataType('microsoft.graph.workspace');
$requestBody->setNickname('Conf Room');
$requestBody->setLabel('100');
$requestBody->setCapacity(50);
$requestBody->setIsWheelChairAccessible(false);
$additionalData = [
	'building' => '1',
];
$requestBody->setAdditionalData($additionalData);

$result = $graphServiceClient->places()->byPlaceId('place-id')->patch($requestBody)->wait();


Import-Module Microsoft.Graph.Calendar

$params = @{
	"@odata.type" = "microsoft.graph.workspace"
	nickname = "Conf Room"
	building = "1"
	label = "100"
	capacity = 
	isWheelChairAccessible = $false
}

Update-MgPlace -PlaceId $placeId -BodyParameter $params


# Code snippets are only available for the latest version. Current version is 1.x
from msgraph import GraphServiceClient
from msgraph.generated.models.workspace import Workspace
# To initialize your graph_client, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=python
request_body = Workspace(
	odata_type = "microsoft.graph.workspace",
	nickname = "Conf Room",
	label = "100",
	capacity = 50,
	is_wheel_chair_accessible = False,
	additional_data = {
			"building" : "1",
	}
)

result = await graph_client.places.by_place_id('place-id').patch(request_body)

Réponse

L’exemple suivant illustre la réponse.

HTTP/1.1 200 OK
Content-Type: application/json

{
  "@odata.context": "https://graph.microsoft.com/v1.0/$metadata#places/$entity",
  "@odata.type": "#microsoft.graph.workspace",
  "id": "3162F1E1-C4C0-604B-51D8-91DA78989EB1",
  "emailAddress": "ws100@contoso.com",
  "displayName": "Workspace 100",
  "address": {
    "street": "4567 Main Street",
    "city": "Buffalo",
    "state": "NY",
    "postalCode": "98052",
    "countryOrRegion": "US"
  },
  "geoCoordinates": {
    "latitude": 47.0,
    "longitude": -122.0
  },
  "phone": "555-555-0100",
  "nickname": "Workspace",
  "label": "100",
  "capacity": 50,
  "building": "1",
  "floorLabel": "1P",
  "floorNumber": 1,
  "isWheelChairAccessible": false,
  "tags": [
    "bean bags"
  ],
  "placeId": "357e8ddc-8af5-4c7c-bc38-ddb3bcfec0d9"
}

Exemple 7 : mettre à jour une liste de salles

L’exemple suivant montre comment mettre à jour un objet roomList .

Demande

L’exemple suivant illustre une demande.

PATCH https://graph.microsoft.com/v1.0/places/Building1RroomList@contoso.com
Content-Type: application/json

{
  "@odata.type": "microsoft.graph.roomList",
  "displayName": "Building 1",
  "phone": "555-555-0100",
  "address": {
    "street": "4567 Main Street",
    "city": "Buffalo",
    "state": "NY",
    "postalCode": "98052",
    "countryOrRegion": "US"
  },
  "geoCoordinates": {
    "altitude": null,
    "latitude": 47.0,
    "longitude": -122.0,
    "accuracy": null,
    "altitudeAccuracy": null
  }
}


// Code snippets are only available for the latest version. Current version is 5.x

// Dependencies
using Microsoft.Graph.Models;

var requestBody = new RoomList
{
	OdataType = "microsoft.graph.roomList",
	DisplayName = "Building 1",
	Phone = "555-555-0100",
	Address = new PhysicalAddress
	{
		Street = "4567 Main Street",
		City = "Buffalo",
		State = "NY",
		PostalCode = "98052",
		CountryOrRegion = "US",
	},
	GeoCoordinates = new OutlookGeoCoordinates
	{
		Altitude = null,
		Latitude = 47d,
		Longitude = -122d,
		Accuracy = null,
		AltitudeAccuracy = null,
	},
};

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=csharp
var result = await graphClient.Places["{place-id}"].PatchAsync(requestBody);



// Code snippets are only available for the latest major version. Current major version is $v1.*

// Dependencies
import (
	  "context"
	  msgraphsdk "github.com/microsoftgraph/msgraph-sdk-go"
	  graphmodels "github.com/microsoftgraph/msgraph-sdk-go/models"
	  //other-imports
)

requestBody := graphmodels.NewPlace()
displayName := "Building 1"
requestBody.SetDisplayName(&displayName) 
phone := "555-555-0100"
requestBody.SetPhone(&phone) 
address := graphmodels.NewPhysicalAddress()
street := "4567 Main Street"
address.SetStreet(&street) 
city := "Buffalo"
address.SetCity(&city) 
state := "NY"
address.SetState(&state) 
postalCode := "98052"
address.SetPostalCode(&postalCode) 
countryOrRegion := "US"
address.SetCountryOrRegion(&countryOrRegion) 
requestBody.SetAddress(address)
geoCoordinates := graphmodels.NewOutlookGeoCoordinates()
altitude := null
geoCoordinates.SetAltitude(&altitude) 
latitude := float64(47)
geoCoordinates.SetLatitude(&latitude) 
longitude := float64(-122)
geoCoordinates.SetLongitude(&longitude) 
accuracy := null
geoCoordinates.SetAccuracy(&accuracy) 
altitudeAccuracy := null
geoCoordinates.SetAltitudeAccuracy(&altitudeAccuracy) 
requestBody.SetGeoCoordinates(geoCoordinates)

// To initialize your graphClient, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=go
places, err := graphClient.Places().ByPlaceId("place-id").Patch(context.Background(), requestBody, nil)


// Code snippets are only available for the latest version. Current version is 6.x

GraphServiceClient graphClient = new GraphServiceClient(requestAdapter);

RoomList place = new RoomList();
place.setOdataType("microsoft.graph.roomList");
place.setDisplayName("Building 1");
place.setPhone("555-555-0100");
PhysicalAddress address = new PhysicalAddress();
address.setStreet("4567 Main Street");
address.setCity("Buffalo");
address.setState("NY");
address.setPostalCode("98052");
address.setCountryOrRegion("US");
place.setAddress(address);
OutlookGeoCoordinates geoCoordinates = new OutlookGeoCoordinates();
geoCoordinates.setAltitude(null);
geoCoordinates.setLatitude(47d);
geoCoordinates.setLongitude(-122d);
geoCoordinates.setAccuracy(null);
geoCoordinates.setAltitudeAccuracy(null);
place.setGeoCoordinates(geoCoordinates);
Place result = graphClient.places().byPlaceId("{place-id}").patch(place);


const options = {
	authProvider,
};

const client = Client.init(options);

const place = {
  '@odata.type': 'microsoft.graph.roomList',
  displayName: 'Building 1',
  phone: '555-555-0100',
  address: {
    street: '4567 Main Street',
    city: 'Buffalo',
    state: 'NY',
    postalCode: '98052',
    countryOrRegion: 'US'
  },
  geoCoordinates: {
    altitude: null,
    latitude: 47.0,
    longitude: -122.0,
    accuracy: null,
    altitudeAccuracy: null
  }
};

await client.api('/places/Building1RroomList@contoso.com')
	.update(place);


<?php
use Microsoft\Graph\GraphServiceClient;
use Microsoft\Graph\Generated\Models\RoomList;
use Microsoft\Graph\Generated\Models\PhysicalAddress;
use Microsoft\Graph\Generated\Models\OutlookGeoCoordinates;


$graphServiceClient = new GraphServiceClient($tokenRequestContext, $scopes);

$requestBody = new RoomList();
$requestBody->setOdataType('microsoft.graph.roomList');
$requestBody->setDisplayName('Building 1');
$requestBody->setPhone('555-555-0100');
$address = new PhysicalAddress();
$address->setStreet('4567 Main Street');
$address->setCity('Buffalo');
$address->setState('NY');
$address->setPostalCode('98052');
$address->setCountryOrRegion('US');
$requestBody->setAddress($address);
$geoCoordinates = new OutlookGeoCoordinates();
$geoCoordinates->setAltitude(null);
$geoCoordinates->setLatitude(47);
$geoCoordinates->setLongitude(-122);
$geoCoordinates->setAccuracy(null);
$geoCoordinates->setAltitudeAccuracy(null);
$requestBody->setGeoCoordinates($geoCoordinates);

$result = $graphServiceClient->places()->byPlaceId('place-id')->patch($requestBody)->wait();

Snippet not available


# Code snippets are only available for the latest version. Current version is 1.x
from msgraph import GraphServiceClient
from msgraph.generated.models.room_list import RoomList
from msgraph.generated.models.physical_address import PhysicalAddress
from msgraph.generated.models.outlook_geo_coordinates import OutlookGeoCoordinates
# To initialize your graph_client, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=python
request_body = RoomList(
	odata_type = "microsoft.graph.roomList",
	display_name = "Building 1",
	phone = "555-555-0100",
	address = PhysicalAddress(
		street = "4567 Main Street",
		city = "Buffalo",
		state = "NY",
		postal_code = "98052",
		country_or_region = "US",
	),
	geo_coordinates = OutlookGeoCoordinates(
		altitude = None,
		latitude = 47,
		longitude = -122,
		accuracy = None,
		altitude_accuracy = None,
	),
)

result = await graph_client.places.by_place_id('place-id').patch(request_body)

Réponse

L’exemple suivant illustre la réponse.

HTTP/1.1 200 OK
Content-Type: application/json

{
  "@odata.context": "https://graph.microsoft.com/v1.0/$metadata#places/$entity",
  "@odata.type": "#microsoft.graph.roomList",
  "id": "DC404124-302A-92AA-F98D-7B4DEB0C1705",
  "displayName": "Building 1",
  "address": {
    "street": "4567 Main Street",
    "city": "Buffalo",
    "state": "NY",
    "postalCode": "98052",
    "countryOrRegion": "US"
  },
  "geoCoordinates": {
    "altitude": null,
    "latitude": 47.0,
    "longitude": -122.0,
    "accuracy": null,
    "altitudeAccuracy": null
  },
  "phone": "555-555-0100",
  "emailAddress": "bldg1@contoso.com",
  "placeId": "406bd1b2-237c-4710-bda2-8b7900d61b27"
}

Commentaires

Cette page a-t-elle été utile ?

Last updated on 2026-03-21

Emplacement de mise à jour

Autorisations

Requête HTTP

En-têtes de demande

Corps de la demande

Réponse

Exemples

Exemple 1 : mettre à jour un bâtiment

Demande

Réponse

Exemple 2 : mettre à jour un plancher

Demande

Réponse

Exemple 3 : Mettre à jour une section

Demande

Réponse

Exemple 4 : Mettre à jour un bureau

Demande

Réponse

Exemple 5 : Mise à jour d’une salle

Demande

Réponse

Exemple 6 : Mettre à jour un espace de travail

Demande

Réponse

Exemple 7 : mettre à jour une liste de salles

Demande

Réponse

Commentaires

Ressources supplémentaires