Publication.Create 方法

public:
 void Create();

public void Create();

member this.Create : unit -> unit

Public Sub Create ()

例外狀況

範例

此範例產生交易性出版物。

// Set the Publisher, publication database, and publication names.
string publicationName = "AdvWorksProductTran";
string publicationDbName = "AdventureWorks2012";
string publisherName = publisherInstance;

ReplicationDatabase publicationDb;
TransPublication publication;

// Create a connection to the Publisher using Windows Authentication.
ServerConnection conn;
conn = new ServerConnection(publisherName);


try
{
    // Connect to the Publisher.
    conn.Connect();

    // Enable the AdventureWorks2012 database for transactional publishing.
    publicationDb = new ReplicationDatabase(publicationDbName, conn);

    // If the database exists and is not already enabled, 
    // enable it for transactional publishing.
    if (publicationDb.LoadProperties())
    {
        if (!publicationDb.EnabledTransPublishing)
        {
            publicationDb.EnabledTransPublishing = true;
        }

        // If the Log Reader Agent does not exist, create it.
        if (!publicationDb.LogReaderAgentExists)
        {
            // Specify the Windows account under which the agent job runs.
            // This account will be used for the local connection to the 
            // Distributor and all agent connections that use Windows Authentication.
            publicationDb.LogReaderAgentProcessSecurity.Login = winLogin;
            publicationDb.LogReaderAgentProcessSecurity.Password = winPassword;

            // Explicitly set authentication mode for the Publisher connection
            // to the default value of Windows Authentication.
            publicationDb.LogReaderAgentPublisherSecurity.WindowsAuthentication = true;

            // Create the Log Reader Agent job.
            publicationDb.CreateLogReaderAgent();
        }
    }
    else
    {
        throw new ApplicationException(String.Format(
            "The {0} database does not exist at {1}.",
            publicationDb, publisherName));
    }

    // Set the required properties for the transactional publication.
    publication = new TransPublication();
    publication.ConnectionContext = conn;
    publication.Name = publicationName;
    publication.DatabaseName = publicationDbName;

    // Specify a transactional publication (the default).
    publication.Type = PublicationType.Transactional;

    // Activate the publication so that we can add subscriptions.
    publication.Status = State.Active;

    // Enable push and pull subscriptions and independent Distribition Agents.
    publication.Attributes |= PublicationAttributes.AllowPull;
    publication.Attributes |= PublicationAttributes.AllowPush;
    publication.Attributes |= PublicationAttributes.IndependentAgent;

    // Specify the Windows account under which the Snapshot Agent job runs.
    // This account will be used for the local connection to the 
    // Distributor and all agent connections that use Windows Authentication.
    publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin;
    publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword;

    // Explicitly set the security mode for the Publisher connection
    // Windows Authentication (the default).
    publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = true;

    if (!publication.IsExistingObject)
    {
        // Create the transactional publication.
        publication.Create();

        // Create a Snapshot Agent job for the publication.
        publication.CreateSnapshotAgent();
    }
    else
    {
        throw new ApplicationException(String.Format(
            "The {0} publication already exists.", publicationName));
    }
}

catch (Exception ex)
{
    // Implement custom application error handling here.
    throw new ApplicationException(String.Format(
        "The publication {0} could not be created.", publicationName), ex);
}
finally
{
    conn.Disconnect();
}

' Set the Publisher, publication database, and publication names.
Dim publicationName As String = "AdvWorksProductTran"
Dim publicationDbName As String = "AdventureWorks2012"
Dim publisherName As String = publisherInstance

Dim publicationDb As ReplicationDatabase
Dim publication As TransPublication

' Create a connection to the Publisher using Windows Authentication.
Dim conn As ServerConnection
conn = New ServerConnection(publisherName)

Try
    ' Connect to the Publisher.
    conn.Connect()

    ' Enable the AdventureWorks2012 database for transactional publishing.
    publicationDb = New ReplicationDatabase(publicationDbName, conn)

    ' If the database exists and is not already enabled, 
    ' enable it for transactional publishing.
    If publicationDb.LoadProperties() Then
        If Not publicationDb.EnabledTransPublishing Then
            publicationDb.EnabledTransPublishing = True
        End If

        ' If the Log Reader Agent does not exist, create it.
        If Not publicationDb.LogReaderAgentExists Then
            ' Specify the Windows account under which the agent job runs.
            ' This account will be used for the local connection to the 
            ' Distributor and all agent connections that use Windows Authentication.
            publicationDb.LogReaderAgentProcessSecurity.Login = winLogin
            publicationDb.LogReaderAgentProcessSecurity.Password = winPassword

            ' Explicitly set authentication mode for the Publisher connection
            ' to the default value of Windows Authentication.
            publicationDb.LogReaderAgentPublisherSecurity.WindowsAuthentication = True

            ' Create the Log Reader Agent job.
            publicationDb.CreateLogReaderAgent()
        End If
    Else
        Throw New ApplicationException(String.Format( _
         "The {0} database does not exist at {1}.", _
         publicationDb, publisherName))
    End If

    ' Set the required properties for the transactional publication.
    publication = New TransPublication()
    publication.ConnectionContext = conn
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName

    ' Specify a transactional publication (the default).
    publication.Type = PublicationType.Transactional

    'Enable push and pull subscriptions and independent Distribition Agents.
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.AllowPull
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.AllowPush
    publication.Attributes = _
    publication.Attributes Or PublicationAttributes.IndependentAgent

    ' Activate the publication so that we can add subscriptions.
    publication.Status = State.Active

    ' Specify the Windows account under which the Snapshot Agent job runs.
    ' This account will be used for the local connection to the 
    ' Distributor and all agent connections that use Windows Authentication.
    publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin
    publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword

    ' Explicitly set the security mode for the Publisher connection
    ' Windows Authentication (the default).
    publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = True

    If Not publication.IsExistingObject Then
        ' Create the transactional publication.
        publication.Create()

        ' Create a Snapshot Agent job for the publication.
        publication.CreateSnapshotAgent()
    Else
        Throw New ApplicationException(String.Format( _
            "The {0} publication already exists.", publicationName))
    End If
Catch ex As Exception
    ' Implement custom application error handling here.
    Throw New ApplicationException(String.Format( _
        "The publication {0} could not be created.", publicationName), ex)
Finally
    conn.Disconnect()
End Try

此範例會產生合併出版。

// Set the Publisher, publication database, and publication names.
string publisherName = publisherInstance;
string publicationName = "AdvWorksSalesOrdersMerge";
string publicationDbName = "AdventureWorks2012";

ReplicationDatabase publicationDb;
MergePublication publication;

// Create a connection to the Publisher.
ServerConnection conn = new ServerConnection(publisherName);

try
{
    // Connect to the Publisher.
    conn.Connect();

    // Enable the database for merge publication.				
    publicationDb = new ReplicationDatabase(publicationDbName, conn);
    if (publicationDb.LoadProperties())
    {
        if (!publicationDb.EnabledMergePublishing)
        {
            publicationDb.EnabledMergePublishing = true;
        }
    }
    else
    {
        // Do something here if the database does not exist. 
        throw new ApplicationException(String.Format(
            "The {0} database does not exist on {1}.",
            publicationDb, publisherName));
    }

    // Set the required properties for the merge publication.
    publication = new MergePublication();
    publication.ConnectionContext = conn;
    publication.Name = publicationName;
    publication.DatabaseName = publicationDbName;

    // Enable precomputed partitions.
    publication.PartitionGroupsOption = PartitionGroupsOption.True;

    // Specify the Windows account under which the Snapshot Agent job runs.
    // This account will be used for the local connection to the 
    // Distributor and all agent connections that use Windows Authentication.
    publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin;
    publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword;

    // Explicitly set the security mode for the Publisher connection
    // Windows Authentication (the default).
    publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = true;

    // Enable Subscribers to request snapshot generation and filtering.
    publication.Attributes |= PublicationAttributes.AllowSubscriberInitiatedSnapshot;
    publication.Attributes |= PublicationAttributes.DynamicFilters;

    // Enable pull and push subscriptions.
    publication.Attributes |= PublicationAttributes.AllowPull;
    publication.Attributes |= PublicationAttributes.AllowPush;

    if (!publication.IsExistingObject)
    {
        // Create the merge publication.
        publication.Create();
        
        // Create a Snapshot Agent job for the publication.
        publication.CreateSnapshotAgent();
    }
    else
    {
        throw new ApplicationException(String.Format(
            "The {0} publication already exists.", publicationName));
    }
}

catch (Exception ex)
{
    // Implement custom application error handling here.
    throw new ApplicationException(String.Format(
        "The publication {0} could not be created.", publicationName), ex);
}
finally
{
    conn.Disconnect();
}

' Set the Publisher, publication database, and publication names.
Dim publisherName As String = publisherInstance
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publicationDbName As String = "AdventureWorks2012"

Dim publicationDb As ReplicationDatabase
Dim publication As MergePublication

' Create a connection to the Publisher.
Dim conn As ServerConnection = New ServerConnection(publisherName)

Try
    ' Connect to the Publisher.
    conn.Connect()

    ' Enable the database for merge publication.				
    publicationDb = New ReplicationDatabase(publicationDbName, conn)
    If publicationDb.LoadProperties() Then
        If Not publicationDb.EnabledMergePublishing Then
            publicationDb.EnabledMergePublishing = True
        End If
    Else
        ' Do something here if the database does not exist. 
        Throw New ApplicationException(String.Format( _
         "The {0} database does not exist on {1}.", _
         publicationDb, publisherName))
    End If

    ' Set the required properties for the merge publication.
    publication = New MergePublication()
    publication.ConnectionContext = conn
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName

    ' Enable precomputed partitions.
    publication.PartitionGroupsOption = PartitionGroupsOption.True

    ' Specify the Windows account under which the Snapshot Agent job runs.
    ' This account will be used for the local connection to the 
    ' Distributor and all agent connections that use Windows Authentication.
    publication.SnapshotGenerationAgentProcessSecurity.Login = winLogin
    publication.SnapshotGenerationAgentProcessSecurity.Password = winPassword

    ' Explicitly set the security mode for the Publisher connection
    ' Windows Authentication (the default).
    publication.SnapshotGenerationAgentPublisherSecurity.WindowsAuthentication = True

    ' Enable Subscribers to request snapshot generation and filtering.
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowSubscriberInitiatedSnapshot
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.DynamicFilters

    ' Enable pull and push subscriptions
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowPull
    publication.Attributes = publication.Attributes Or _
        PublicationAttributes.AllowPush

    If Not publication.IsExistingObject Then
        ' Create the merge publication.
        publication.Create()

        ' Create a Snapshot Agent job for the publication.
        publication.CreateSnapshotAgent()
    Else
        Throw New ApplicationException(String.Format( _
            "The {0} publication already exists.", publicationName))
    End If
Catch ex As Exception
    ' Implement custom application error handling here.
    Throw New ApplicationException(String.Format( _
        "The publication {0} could not be created.", publicationName), ex)
Finally
    conn.Disconnect()
End Try

備註

在設定遠端發行商的 Publisher 時，所有屬性（包括 SnapshotGenerationAgentProcessSecurity）提供的數值會以純文字形式傳送給發行商。 您應該先加密「發行者」及其遠端「散發者」之間的連線，然後再呼叫 Create 方法。 如需詳細資訊，請參閱 加密 SQL Server 的連線。

Create此方法僅能由 Publisher 固定伺服器角色的成員sysadmin或出版資料庫中固定資料庫角色的成員db_owner呼叫。

呼叫該 Create 方法等同於執行 sp_addpublication（Transact-SQL） 或 sp_addmergepublication（Transact-SQL）。