Convert.ToByte 方法

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::String ^ value);

public static byte ToByte(string value);

public static byte ToByte(string? value);

static member ToByte : string -> byte

Public Shared Function ToByte (value As String) As Byte

參數

傳回

一個 8 位元無符號整數，等價value於 ，或當 為 value時 則為零。null

例外狀況

範例

以下範例定義一個字串陣列，並嘗試將每個字串轉換成 Byte。 注意當字 null 串解析為零時， String.Empty 會拋出一個 FormatException。 另外要注意的是，雖然前置和後置空格都能成功解析，但格式化符號，如貨幣符號、群組分隔符或十進位分隔符則無法。

using System;

public class Example5
{
   public static void Main()
   {
      String[] values = { null, "", "0xC9", "C9", "101", "16.3",
                          "$12", "$12.01", "-4", "1,032", "255",
                          "   16  " };
      foreach (var value in values) {
         try {
            byte number = Convert.ToByte(value);
            Console.WriteLine("'{0}' --> {1}",
                              value == null ? "<null>" : value, number);
         }
         catch (FormatException) {
            Console.WriteLine("Bad Format: '{0}'",
                              value == null ? "<null>" : value);
         }
         catch (OverflowException) {
            Console.WriteLine("OverflowException: '{0}'", value);
         }
      }
   }
}
// The example displays the following output:
//     '<null>' --> 0
//     Bad Format: ''
//     Bad Format: '0xC9'
//     Bad Format: 'C9'
//     '101' --> 101
//     Bad Format: '16.3'
//     Bad Format: '$12'
//     Bad Format: '$12.01'
//     OverflowException: '-4'
//     Bad Format: '1,032'
//     '255' --> 255
//     '   16  ' --> 16

open System

let values = 
    [| null; ""; "0xC9"; "C9"; "101"; "16.3"; "$12"
       "$12.01"; "-4"; "1,032"; "255"; "   16  " |]

for value in values do
    try
        let number = Convert.ToByte(value)
        printfn $"""'%A{value}' --> {number}"""
    with
    | :? FormatException ->
        printfn $"Bad Format: '%A{value}'"
    | :? OverflowException ->
        printfn $"OverflowException: '{value}'"
        
// The example displays the following output:
//     '<null>' --> 0
//     Bad Format: ''
//     Bad Format: '0xC9'
//     Bad Format: 'C9'
//     '101' --> 101
//     Bad Format: '16.3'
//     Bad Format: '$12'
//     Bad Format: '$12.01'
//     OverflowException: '-4'
//     Bad Format: '1,032'
//     '255' --> 255
//     '   16  ' --> 16

Module Example
   Public Sub Main()
      Dim values() As String = { Nothing, "", "0xC9", "C9", "101", 
                                 "16.3", "$12", "$12.01", "-4", 
                                 "1,032", "255", "   16  " }
      For Each value In values
         Try 
            Dim number As Byte = Convert.ToByte(value)
            Console.WriteLine("'{0}' --> {1}", 
                              If(value Is Nothing, "<null>", value), number)
         Catch e As FormatException
            Console.WriteLine("Bad Format: '{0}'", 
                              If(value Is Nothing, "<null>", value))
         Catch e As OverflowException
            Console.WriteLine("OverflowException: '{0}'", value)
         End Try
      Next
   End Sub
End Module
' The example displays the following output:
'     '<null>' --> 0
'     Bad Format: ''
'     Bad Format: '0xC9'
'     Bad Format: 'C9'
'     '101' --> 101
'     Bad Format: '16.3'
'     Bad Format: '$12'
'     Bad Format: '$12.01'
'     OverflowException: '-4'
'     Bad Format: '1,032'
'     '255' --> 255
'     '   16  ' --> 16

備註

使用該 ToByte(String) 方法等同於將方法傳入 value 該 Byte.Parse(String) 方法。 value 是透過使用當前文化的格式慣例來解釋。

如果你不想在轉換失敗時處理例外，可以直接呼叫該 Byte.TryParse 方法。 它會回傳 Boolean 一個值，表示轉換是否成功。

另請參閱

• Parse(String)

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::UInt16 value);

[System.CLSCompliant(false)]
public static byte ToByte(ushort value);

[<System.CLSCompliant(false)>]
static member ToByte : uint16 -> byte

Public Shared Function ToByte (value As UShort) As Byte

參數

傳回

一個 8 位元無符號整數，等價 value於 。

屬性

CLSCompliantAttribute

例外狀況

範例

以下範例將一組無符號的16位元整數陣列轉換為 Byte 值。

ushort[] numbers = { UInt16.MinValue, 121, 340, UInt16.MaxValue };
byte result;
foreach (ushort number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       Converted the UInt16 value 0 to the Byte value 0.
//       Converted the UInt16 value 121 to the Byte value 121.
//       The UInt16 value 340 is outside the range of the Byte type.
//       The UInt16 value 65535 is outside the range of the Byte type.

let numbers = [| UInt16.MinValue; 121us; 340us; UInt16.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       Converted the UInt16 value 0 to the Byte value 0.
//       Converted the UInt16 value 121 to the Byte value 121.
//       The UInt16 value 340 is outside the range of the Byte type.
//       The UInt16 value 65535 is outside the range of the Byte type.

Dim numbers() As UShort = { UInt16.MinValue, 121, 340, UInt16.MaxValue }
Dim result As Byte
For Each number As UShort In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       Converted the UInt16 value 0 to the Byte value 0.
'       Converted the UInt16 value 121 to the Byte value 121.
'       The UInt16 value 340 is outside the range of the Byte type.
'       The UInt16 value 65535 is outside the range of the Byte type.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::UInt32 value);

[System.CLSCompliant(false)]
public static byte ToByte(uint value);

[<System.CLSCompliant(false)>]
static member ToByte : uint32 -> byte

Public Shared Function ToByte (value As UInteger) As Byte

參數

傳回

一個 8 位元無符號整數，等價 value於 。

屬性

CLSCompliantAttribute

例外狀況

範例

以下範例將一組無符號整數陣列轉換為 Byte 值。

uint[] numbers = { UInt32.MinValue, 121, 340, UInt32.MaxValue };
byte result;
foreach (uint number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       Converted the UInt32 value 0 to the Byte value 0.
//       Converted the UInt32 value 121 to the Byte value 121.
//       The UInt32 value 340 is outside the range of the Byte type.
//       The UInt32 value 4294967295 is outside the range of the Byte type.

let numbers = [| UInt32.MinValue; 121u; 340u; UInt32.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       Converted the UInt32 value 0 to the Byte value 0.
//       Converted the UInt32 value 121 to the Byte value 121.
//       The UInt32 value 340 is outside the range of the Byte type.
//       The UInt32 value 4294967295 is outside the range of the Byte type.

Dim numbers() As UInteger = { UInt32.MinValue, 121, 340, UInt32.MaxValue }
Dim result As Byte
For Each number As UInteger In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       Converted the UInt32 value 0 to the Byte value 0.
'       Converted the UInt32 value 121 to the Byte value 121.
'       The UInt32 value 340 is outside the range of the Byte type.
'       The UInt32 value 4294967295 is outside the range of the Byte type.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::String ^ value, int fromBase);

public static byte ToByte(string value, int fromBase);

public static byte ToByte(string? value, int fromBase);

static member ToByte : string * int -> byte

Public Shared Function ToByte (value As String, fromBase As Integer) As Byte

參數

傳回

一個 8 位元無符號整數，若 為 value，則等價於 中的數字 value，或 0（零）。null

例外狀況

範例

以下範例交替嘗試將一組字串解讀為二進位、八進位、十進位和十六進位的表示。

using System;

public class Example2
{
   public static void Main()
   {
      int[] bases = { 2, 8, 10, 16 };
      string[] values = { "-1", "1", "08", "0F", "11" , "12", "30",
                          "101", "255", "FF", "10000000", "80" };
      byte number;
      foreach (int numBase in bases)
      {
         Console.WriteLine("Base {0}:", numBase);
         foreach (string value in values)
         {
            try {
               number = Convert.ToByte(value, numBase);
               Console.WriteLine("   Converted '{0}' to {1}.", value, number);
            }
            catch (FormatException) {
               Console.WriteLine("   '{0}' is not in the correct format for a base {1} byte value.",
                                 value, numBase);
            }
            catch (OverflowException) {
               Console.WriteLine("   '{0}' is outside the range of the Byte type.", value);
            }
            catch (ArgumentException) {
               Console.WriteLine("   '{0}' is invalid in base {1}.", value, numBase);
            }
         }
      }
   }
}

// The example displays the following output:
//    Base 2:
//       '-1' is invalid in base 2.
//       Converted '1' to 1.
//       '08' is not in the correct format for a base 2 conversion.
//       '0F' is not in the correct format for a base 2 conversion.
//       Converted '11' to 3.
//       '12' is not in the correct format for a base 2 conversion.
//       '30' is not in the correct format for a base 2 conversion.
//       Converted '101' to 5.
//       '255' is not in the correct format for a base 2 conversion.
//       'FF' is not in the correct format for a base 2 conversion.
//       Converted '10000000' to 128.
//       '80' is not in the correct format for a base 2 conversion.
//    Base 8:
//       '-1' is invalid in base 8.
//       Converted '1' to 1.
//       '08' is not in the correct format for a base 8 conversion.
//       '0F' is not in the correct format for a base 8 conversion.
//       Converted '11' to 9.
//       Converted '12' to 10.
//       Converted '30' to 24.
//       Converted '101' to 65.
//       Converted '255' to 173.
//       'FF' is not in the correct format for a base 8 conversion.
//       '10000000' is outside the range of the Byte type.
//       '80' is not in the correct format for a base 8 conversion.
//    Base 10:
//       '-1' is outside the range of the Byte type.
//       Converted '1' to 1.
//       Converted '08' to 8.
//       '0F' is not in the correct format for a base 10 conversion.
//       Converted '11' to 11.
//       Converted '12' to 12.
//       Converted '30' to 30.
//       Converted '101' to 101.
//       Converted '255' to 255.
//       'FF' is not in the correct format for a base 10 conversion.
//       '10000000' is outside the range of the Byte type.
//       Converted '80' to 80.
//    Base 16:
//       '-1' is invalid in base 16.
//       Converted '1' to 1.
//       Converted '08' to 8.
//       Converted '0F' to 15.
//       Converted '11' to 17.
//       Converted '12' to 18.
//       Converted '30' to 48.
//       '101' is outside the range of the Byte type.
//       '255' is outside the range of the Byte type.
//       Converted 'FF' to 255.
//       '10000000' is outside the range of the Byte type.
//       Converted '80' to 128.

open System

let bases = [ 2; 8; 10; 16 ]
let values = 
    [| "-1"; "1"; "08"; "0F"; "11"; "12"; "30"
       "101"; "255"; "FF"; "10000000"; "80" |]

for numBase in bases do
    printfn $"Base {numBase}:"
    for value in values do
        try
            let number = Convert.ToByte(value, numBase)
            printfn $"   Converted '{value}' to {number}."
        with
        | :? FormatException ->
            printfn $"   '{value}' is not in the correct format for a base {numBase} byte value."
        | :? OverflowException ->
            printfn $"   '{value}' is outside the range of the Byte type."
        | :? ArgumentException ->
            printfn $"   '{value}' is invalid in base {numBase}."

// The example displays the following output:
//    Base 2:
//       '-1' is invalid in base 2.
//       Converted '1' to 1.
//       '08' is not in the correct format for a base 2 conversion.
//       '0F' is not in the correct format for a base 2 conversion.
//       Converted '11' to 3.
//       '12' is not in the correct format for a base 2 conversion.
//       '30' is not in the correct format for a base 2 conversion.
//       Converted '101' to 5.
//       '255' is not in the correct format for a base 2 conversion.
//       'FF' is not in the correct format for a base 2 conversion.
//       Converted '10000000' to 128.
//       '80' is not in the correct format for a base 2 conversion.
//    Base 8:
//       '-1' is invalid in base 8.
//       Converted '1' to 1.
//       '08' is not in the correct format for a base 8 conversion.
//       '0F' is not in the correct format for a base 8 conversion.
//       Converted '11' to 9.
//       Converted '12' to 10.
//       Converted '30' to 24.
//       Converted '101' to 65.
//       Converted '255' to 173.
//       'FF' is not in the correct format for a base 8 conversion.
//       '10000000' is outside the range of the Byte type.
//       '80' is not in the correct format for a base 8 conversion.
//    Base 10:
//       '-1' is outside the range of the Byte type.
//       Converted '1' to 1.
//       Converted '08' to 8.
//       '0F' is not in the correct format for a base 10 conversion.
//       Converted '11' to 11.
//       Converted '12' to 12.
//       Converted '30' to 30.
//       Converted '101' to 101.
//       Converted '255' to 255.
//       'FF' is not in the correct format for a base 10 conversion.
//       '10000000' is outside the range of the Byte type.
//       Converted '80' to 80.
//    Base 16:
//       '-1' is invalid in base 16.
//       Converted '1' to 1.
//       Converted '08' to 8.
//       Converted '0F' to 15.
//       Converted '11' to 17.
//       Converted '12' to 18.
//       Converted '30' to 48.
//       '101' is outside the range of the Byte type.
//       '255' is outside the range of the Byte type.
//       Converted 'FF' to 255.
//       '10000000' is outside the range of the Byte type.
//       Converted '80' to 128.

Module Example
   Public Sub Main()
      Dim bases() As Integer = { 2, 8, 10, 16 }
      Dim values() As String = { "-1", "1", "08", "0F", "11" , "12", "30", _                
                                  "101", "255", "FF", "10000000", "80" }
      Dim number As Byte
      For Each base As Integer In bases
         Console.WriteLine("Base {0}:", base)
         For Each value As String In values
            Try
               number = Convert.ToByte(value, base)
               Console.WriteLine("   Converted '{0}' to {1}.", value, number)
            Catch e As FormatException
               Console.WriteLine("   '{0}' is not in the correct format for a base {1} conversion.", _
                                 value, base)
            Catch e As OverflowException
               Console.WriteLine("   '{0}' is outside the range of the Byte type.", value)
            Catch e As ArgumentException
               Console.WriteLine("   '{0}' is invalid in base {1}.", value, base)
            End Try   
         Next                                 
      Next 
   End Sub
End Module
' The example displays the following output:
'    Base 2:
'       '-1' is invalid in base 2.
'       Converted '1' to 1.
'       '08' is not in the correct format for a base 2 conversion.
'       '0F' is not in the correct format for a base 2 conversion.
'       Converted '11' to 3.
'       '12' is not in the correct format for a base 2 conversion.
'       '30' is not in the correct format for a base 2 conversion.
'       Converted '101' to 5.
'       '255' is not in the correct format for a base 2 conversion.
'       'FF' is not in the correct format for a base 2 conversion.
'       Converted '10000000' to 128.
'       '80' is not in the correct format for a base 2 conversion.
'    Base 8:
'       '-1' is invalid in base 8.
'       Converted '1' to 1.
'       '08' is not in the correct format for a base 8 conversion.
'       '0F' is not in the correct format for a base 8 conversion.
'       Converted '11' to 9.
'       Converted '12' to 10.
'       Converted '30' to 24.
'       Converted '101' to 65.
'       Converted '255' to 173.
'       'FF' is not in the correct format for a base 8 conversion.
'       '10000000' is outside the range of the Byte type.
'       '80' is not in the correct format for a base 8 conversion.
'    Base 10:
'       '-1' is outside the range of the Byte type.
'       Converted '1' to 1.
'       Converted '08' to 8.
'       '0F' is not in the correct format for a base 10 conversion.
'       Converted '11' to 11.
'       Converted '12' to 12.
'       Converted '30' to 30.
'       Converted '101' to 101.
'       Converted '255' to 255.
'       'FF' is not in the correct format for a base 10 conversion.
'       '10000000' is outside the range of the Byte type.
'       Converted '80' to 80.
'    Base 16:
'       '-1' is invalid in base 16.
'       Converted '1' to 1.
'       Converted '08' to 8.
'       Converted '0F' to 15.
'       Converted '11' to 17.
'       Converted '12' to 18.
'       Converted '30' to 48.
'       '101' is outside the range of the Byte type.
'       '255' is outside the range of the Byte type.
'       Converted 'FF' to 255.
'       '10000000' is outside the range of the Byte type.
'       Converted '80' to 128.

備註

如果 fromBase 是 16，你可以在參數指定的 value 數字前加上「0x」或「0X」。

由於資料 Byte 型態僅支援無符號值，此 ToByte(String, Int32) 方法假設 是 value 以無符號二進位表示。 換句話說，全部八位元都用來表示數值，且缺少一個符號位元。 因此，可以撰寫程式碼，將超出資料型別範圍 Byte 的有符號位元組值轉換成 Byte 一個值，而方法不會拋出例外。 以下範例將 MinValue 轉換為十六進位字串表示，然後呼叫該 ToByte(String, Int32) 方法。 該方法不會拋出例外，而是顯示「0x80 轉換成 128。」

// Create a hexadecimal value out of range of the Byte type.
string value = SByte.MinValue.ToString("X");
// Convert it back to a number.
try
{
   byte number = Convert.ToByte(value, 16);
   Console.WriteLine("0x{0} converts to {1}.", value, number);
}
catch (OverflowException)
{
   Console.WriteLine("Unable to convert '0x{0}' to a byte.", value);
}

// Create a hexadecimal value out of range of the Byte type.
let value = SByte.MinValue.ToString "X"
// Convert it back to a number.
try
    let number = Convert.ToByte(value, 16)
    printfn $"0x{value} converts to {number}."
with :? OverflowException ->
    printfn $"Unable to convert '0x{value}' to a byte."

' Create a hexadecimal value out of range of the Byte type.
Dim value As String = SByte.MinValue.ToString("X")
' Convert it back to a number.
Try
   Dim number As Byte = Convert.ToByte(value, 16)
   Console.WriteLine("0x{0} converts to {1}.", value, number)
Catch e As OverflowException
   Console.WriteLine("Unable to convert '0x{0}' to a byte.", value)
End Try

在執行二進位運算或數值轉換時，開發者始終有責任驗證某個方法或運算子是否使用適當的數值表示來解讀特定值。 以下範例說明一種技術，確保方法在將十六進位字串表示 Byte 轉換為值時不會不當使用無符號二進位表示法。 範例中，當值轉換成字串表示時，判斷該值代表有符號整數還是無符號整數。 當範例將值轉換回某個 Byte 值時，會檢查原始值是否為有符號整數。 如果是這樣，且其高階位元被設定（表示值為負且使用二的補數而非無號二進位表示），該方法會拋出例外。

// Create a negative hexadecimal value out of range of the Byte type.
sbyte sourceNumber = SByte.MinValue;
bool isSigned = Math.Sign((sbyte)sourceNumber.GetType().GetField("MinValue").GetValue(null)) == -1;
string value = sourceNumber.ToString("X");
byte targetNumber;
try
{
   targetNumber = Convert.ToByte(value, 16);
   if (isSigned && ((targetNumber & 0x80) != 0))
      throw new OverflowException();
   else
      Console.WriteLine("0x{0} converts to {1}.", value, targetNumber);
}
catch (OverflowException)
{
   Console.WriteLine("Unable to convert '0x{0}' to an unsigned byte.", value);
}
// Displays the following to the console:
//    Unable to convert '0x80' to an unsigned byte.

// Create a negative hexadecimal value out of range of the Byte type.
let sourceNumber = SByte.MinValue
let isSigned = sign (sourceNumber.GetType().GetField("MinValue").GetValue null :?> int8) = -1
let value = sourceNumber.ToString "X"
try
    let targetNumber = Convert.ToByte(value, 16)
    if isSigned && targetNumber &&& 0x80uy <> 0uy then
        raise (OverflowException())
    else
        printfn $"0x{value} converts to {targetNumber}."
with :? OverflowException ->
    printfn $"Unable to convert '0x{value}' to an unsigned byte."
// Displays the following to the console:
//    Unable to convert '0x80' to an unsigned byte.

' Create a negative hexadecimal value out of range of the Byte type.
Dim sourceNumber As SByte = SByte.MinValue
Dim isSigned As Boolean = Math.Sign(sourceNumber.MinValue) = -1
Dim value As String = sourceNumber.ToString("X")
Dim targetNumber As Byte
Try
   targetNumber = Convert.ToByte(value, 16)
   If isSigned And ((targetNumber And &H80) <> 0) Then
      Throw New OverflowException()
   Else 
      Console.WriteLine("0x{0} converts to {1}.", value, targetNumber)
   End If    
Catch e As OverflowException
   Console.WriteLine("Unable to convert '0x{0}' to an unsigned byte.", value)
End Try 
' Displays the following to the console:
'    Unable to convert '0x80' to an unsigned byte.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::Object ^ value, IFormatProvider ^ provider);

public static byte ToByte(object value, IFormatProvider provider);

public static byte ToByte(object? value, IFormatProvider? provider);

static member ToByte : obj * IFormatProvider -> byte

Public Shared Function ToByte (value As Object, provider As IFormatProvider) As Byte

參數

傳回

一個 8 位元無符號整數，等價value於 ，或當 為 value時 則為零。null

例外狀況

範例

下面的示例定義實現 ByteString 介面的 IConvertible 類。 這個類別會儲存一個位元組值的字串表示法以及一個符號欄位，因此它能夠同時表示有號和無號的位元組值。

using System;
using System.Globalization;

public enum SignBit { Negative=-1, Zero=0, Positive=1 };

public struct ByteString3 : IConvertible
{
   private SignBit signBit;
   private string byteString;

   public SignBit Sign
   {
      set { signBit = value; }
      get { return signBit; }
   }

   public string Value
   {
      set {
         if (value.Trim().Length > 2)
            throw new ArgumentException("The string representation of a byte cannot have more than two characters.");
         else
            byteString = value;
      }
      get { return byteString; }
   }

   // IConvertible implementations.
   public TypeCode GetTypeCode() {
      return TypeCode.Object;
   }

   public bool ToBoolean(IFormatProvider provider)
   {
      if (signBit == SignBit.Zero)
         return false;
      else
         return true;
   }

   public byte ToByte(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is out of range of the Byte type.", Convert.ToSByte(byteString, 16)));
      else
         return Byte.Parse(byteString, NumberStyles.HexNumber);
   }

   public char ToChar(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative) {
         throw new OverflowException(String.Format("{0} is out of range of the Char type.", Convert.ToSByte(byteString, 16)));
      }
      else {
         byte byteValue = Byte.Parse(this.byteString, NumberStyles.HexNumber);
         return Convert.ToChar(byteValue);
      }
   }

   public DateTime ToDateTime(IFormatProvider provider)
   {
      throw new InvalidCastException("ByteString3 to DateTime conversion is not supported.");
   }

   public decimal ToDecimal(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
      {
         sbyte byteValue = SByte.Parse(byteString, NumberStyles.HexNumber);
         return Convert.ToDecimal(byteValue);
      }
      else
      {
         byte byteValue = Byte.Parse(byteString, NumberStyles.HexNumber);
         return Convert.ToDecimal(byteValue);
      }
   }

   public double ToDouble(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToDouble(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToDouble(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public short ToInt16(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToInt16(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToInt16(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public int ToInt32(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToInt32(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToInt32(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public long ToInt64(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToInt64(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToInt64(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public sbyte ToSByte(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         try {
            return Convert.ToSByte(Byte.Parse(byteString, NumberStyles.HexNumber));
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is outside the range of the SByte type.",
                                                   Byte.Parse(byteString, NumberStyles.HexNumber)), e);
         }
      else
         return SByte.Parse(byteString, NumberStyles.HexNumber);
   }

   public float ToSingle(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToSingle(SByte.Parse(byteString, NumberStyles.HexNumber));
      else
         return Convert.ToSingle(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public string ToString(IFormatProvider provider)
   {
      return "0x" + this.byteString;
   }

   public object ToType(Type conversionType, IFormatProvider provider)
   {
      switch (Type.GetTypeCode(conversionType))
      {
         case TypeCode.Boolean:
            return this.ToBoolean(null);
         case TypeCode.Byte:
            return this.ToByte(null);
         case TypeCode.Char:
            return this.ToChar(null);
         case TypeCode.DateTime:
            return this.ToDateTime(null);
         case TypeCode.Decimal:
            return this.ToDecimal(null);
         case TypeCode.Double:
            return this.ToDouble(null);
         case TypeCode.Int16:
            return this.ToInt16(null);
         case TypeCode.Int32:
            return this.ToInt32(null);
         case TypeCode.Int64:
            return this.ToInt64(null);
         case TypeCode.Object:
            if (typeof(ByteString3).Equals(conversionType))
               return this;
            else
               throw new InvalidCastException(String.Format("Conversion to a {0} is not supported.", conversionType.Name));
         case TypeCode.SByte:
            return this.ToSByte(null);
         case TypeCode.Single:
            return this.ToSingle(null);
         case TypeCode.String:
            return this.ToString(null);
         case TypeCode.UInt16:
            return this.ToUInt16(null);
         case TypeCode.UInt32:
            return this.ToUInt32(null);
         case TypeCode.UInt64:
            return this.ToUInt64(null);
         default:
            throw new InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name));
      }
   }

   public UInt16 ToUInt16(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt16 type.",
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)));
      else
         return Convert.ToUInt16(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public UInt32 ToUInt32(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt32 type.",
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)));
      else
         return Convert.ToUInt32(Byte.Parse(byteString, NumberStyles.HexNumber));
   }

   public UInt64 ToUInt64(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt64 type.",
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)));
      else
         return Convert.ToUInt64(Byte.Parse(byteString, NumberStyles.HexNumber));
   }
}

open System
open System.Globalization

type SignBit =
   | Negative = -1
   | Zero = 0
   | Positive = 1

[<Struct>]
type ByteString =
    val mutable private value: string
    
    val mutable Sign : SignBit
    member this.Value
        with get () = this.value
        and set (value: string) =
            if value.Trim().Length > 2 then
                invalidArg "value" "The string representation of a byte cannot have more than two characters"
            else
                this.value <- value 

    // IConvertible implementations.
    interface IConvertible with
        member _.GetTypeCode() =
            TypeCode.Object

        member this.ToBoolean(provider: IFormatProvider) =
            this.Sign <> SignBit.Zero

        member this.ToByte(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Convert.ToSByte(this.value, 16)} is out of range of the Byte type.")
            else
                Byte.Parse(this.value, NumberStyles.HexNumber)

        member this.ToChar(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Convert.ToSByte(this.value, 16)} is out of range of the Char type.")
            else
                let byteValue = Byte.Parse(this.value, NumberStyles.HexNumber)
                Convert.ToChar byteValue

        member _.ToDateTime(provider: IFormatProvider) =
            raise (InvalidCastException "ByteString to DateTime conversion is not supported.")

        member this.ToDecimal(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                let byteValue = SByte.Parse(this.Value, NumberStyles.HexNumber)
                Convert.ToDecimal byteValue
            else
                let byteValue = Byte.Parse(this.Value, NumberStyles.HexNumber)
                Convert.ToDecimal byteValue

        member this.ToDouble(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToDouble(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToDouble(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToInt16(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToInt16(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToInt16(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToInt32(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToInt32(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToInt32(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToInt64(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToInt64(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToInt64(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToSByte(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                try
                    Convert.ToSByte(Byte.Parse(this.value, NumberStyles.HexNumber))
                with :? OverflowException as e ->
                    raise (OverflowException($"{Byte.Parse(this.value, NumberStyles.HexNumber)} is outside the range of the SByte type.", e))
            else
                SByte.Parse(this.value, NumberStyles.HexNumber)

        member this.ToSingle(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToSingle(SByte.Parse(this.value, NumberStyles.HexNumber))
            else
                Convert.ToSingle(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToString(provider: IFormatProvider) =
            "0x" + this.value

        member this.ToType(conversionType: Type, provider: IFormatProvider): obj =
            let this = this :> IConvertible
            match Type.GetTypeCode conversionType with
            | TypeCode.Boolean ->
                this.ToBoolean null
            | TypeCode.Byte ->
                this.ToByte null
            | TypeCode.Char ->
                this.ToChar null
            | TypeCode.DateTime ->
                this.ToDateTime null
            | TypeCode.Decimal ->
                this.ToDecimal null
            | TypeCode.Double ->
                this.ToDouble null
            | TypeCode.Int16 ->
                this.ToInt16 null
            | TypeCode.Int32 ->
                this.ToInt32 null
            | TypeCode.Int64 ->
                this.ToInt64 null
            | TypeCode.Object ->
                if typeof<ByteString>.Equals conversionType then
                    this
                else
                    raise (InvalidCastException $"Conversion to a {conversionType.Name} is not supported.")
            | TypeCode.SByte ->
                this.ToSByte null
            | TypeCode.Single ->
                this.ToSingle null
            | TypeCode.String ->
                this.ToString null
            | TypeCode.UInt16 ->
                this.ToUInt16 null
            | TypeCode.UInt32 ->
                this.ToUInt32 null
            | TypeCode.UInt64 ->
                this.ToUInt64 null
            | _ ->
                raise (InvalidCastException $"Conversion to {conversionType.Name} is not supported.")

        member this.ToUInt16(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{SByte.Parse(this.value, NumberStyles.HexNumber)} is outside the range of the UInt16 type.")
            else
                Convert.ToUInt16(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToUInt32(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{SByte.Parse(this.value, NumberStyles.HexNumber)} is outside the range of the UInt32 type.")
            else
                Convert.ToUInt32(Byte.Parse(this.value, NumberStyles.HexNumber))

        member this.ToUInt64(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{SByte.Parse(this.value, NumberStyles.HexNumber)} is outside the range of the UInt64 type.")
            else
                Convert.ToUInt64(Byte.Parse(this.value, NumberStyles.HexNumber))

Imports System.Globalization

Public Enum SignBit As Integer
   Positive = 1
   Zero = 0
   Negative = -1
End Enum

Public Structure ByteString : Implements IConvertible
   Private signBit As SignBit
   Private byteString As String
   
   Public Property Sign As SignBit
      Set
         signBit = value
      End Set
      Get
         Return signBit
      End Get
   End Property
   
   Public Property Value As String
      Set
         If value.Trim().Length > 2 Then
            Throw New ArgumentException("The string representation of a byte cannot have more than two characters.")
         Else
            byteString = value
         End If   
      End Set
      Get
         Return byteString
      End Get
   End Property
   
   ' IConvertible implementations.
   Public Function GetTypeCode() As TypeCode _
                   Implements IConvertible.GetTypeCode
      Return TypeCode.Object
   End Function
   
   Public Function ToBoolean(provider As IFormatProvider) As Boolean _
                   Implements IConvertible.ToBoolean
      If signBit = SignBit.Zero Then
         Return False
      Else
         Return True
      End If
   End Function 
   
   Public Function ToByte(provider As IFormatProvider) As Byte _
                   Implements IConvertible.ToByte
      If signBit = signBit.Negative Then
         Throw New OverflowException(String.Format("{0} is out of range of the Byte type.", Convert.ToSByte(byteString, 16))) 
      Else
         Return Byte.Parse(byteString, NumberStyles.HexNumber)
      End If       
   End Function
   
   Public Function ToChar(provider As IFormatProvider) As Char _
                   Implements IConvertible.ToChar
      If signBit = signBit.Negative Then 
         Throw New OverflowException(String.Format("{0} is out of range of the Char type.", Convert.ToSByte(byteString, 16)))
      Else
         Dim byteValue As Byte = Byte.Parse(Me.byteString, NumberStyles.HexNumber)
         Return Convert.ToChar(byteValue)
      End If                
   End Function 
   
   Public Function ToDateTime(provider As IFormatProvider) As Date _
                   Implements IConvertible.ToDateTime
      Throw New InvalidCastException("ByteString to DateTime conversion is not supported.")
   End Function
   
   Public Function ToDecimal(provider As IFormatProvider) As Decimal _
                   Implements IConvertible.ToDecimal
      If signBit = signBit.Negative Then
         Dim byteValue As SByte = SByte.Parse(byteString, NumberStyles.HexNumber)
         Return Convert.ToDecimal(byteValue)
      Else
         Dim byteValue As Byte = Byte.Parse(byteString, NumberStyles.HexNumber)
         Return Convert.ToDecimal(byteValue)
      End If
   End Function
   
   Public Function ToDouble(provider As IFormatProvider) As Double _
                   Implements IConvertible.ToDouble
      If signBit = signBit.Negative Then
         Return Convert.ToDouble(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToDouble(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function   
   
   Public Function ToInt16(provider As IFormatProvider) As Int16 _
                   Implements IConvertible.ToInt16
      If signBit = signBit.Negative Then
         Return Convert.ToInt16(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToInt16(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
   Public Function ToInt32(provider As IFormatProvider) As Int32 _
                   Implements IConvertible.ToInt32
      If signBit = signBit.Negative Then
         Return Convert.ToInt32(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToInt32(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
   Public Function ToInt64(provider As IFormatProvider) As Int64 _
                   Implements IConvertible.ToInt64
      If signBit = signBit.Negative Then
         Return Convert.ToInt64(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToInt64(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
   Public Function ToSByte(provider As IFormatProvider) As SByte _
                   Implements IConvertible.ToSByte
      If signBit = SignBit.Positive Then
         Try
            Return Convert.ToSByte(Byte.Parse(byteString, NumberStyles.HexNumber))
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is outside the range of the SByte type.", _
                                                   Byte.Parse(byteString, NumberStyles.HexNumber)), e)   
         End Try
      Else
         Return SByte.Parse(byteString, NumberStyles.HexNumber)
      End If
   End Function

   Public Function ToSingle(provider As IFormatProvider) As Single _
                   Implements IConvertible.ToSingle
      If signBit = signBit.Negative Then
         Return Convert.ToSingle(SByte.Parse(byteString, NumberStyles.HexNumber))
      Else
         Return Convert.ToSingle(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function

   Public Overloads Function ToString(provider As IFormatProvider) As String _
                   Implements IConvertible.ToString
      Return Me.byteString
   End Function
   
   Public Function ToType(conversionType As Type, provider As IFormatProvider) As Object _
                   Implements IConvertible.ToType
      Select Case Type.GetTypeCode(conversionType)
         Case TypeCode.Boolean 
            Return Me.ToBoolean(Nothing)
         Case TypeCode.Byte
            Return Me.ToByte(Nothing)
         Case TypeCode.Char
            Return Me.ToChar(Nothing)
         Case TypeCode.DateTime
            Return Me.ToDateTime(Nothing)
         Case TypeCode.Decimal
            Return Me.ToDecimal(Nothing)
         Case TypeCode.Double
            Return Me.ToDouble(Nothing)
         Case TypeCode.Int16
            Return Me.ToInt16(Nothing)
         Case TypeCode.Int32
            Return Me.ToInt32(Nothing)
         Case TypeCode.Int64
            Return Me.ToInt64(Nothing)
         Case TypeCode.Object
            If GetType(ByteString).Equals(conversionType) Then
               Return Me
            Else
               Throw New InvalidCastException(String.Format("Conversion to a {0} is not supported.", conversionType.Name))
            End If 
         Case TypeCode.SByte
            Return Me.ToSByte(Nothing)
         Case TypeCode.Single
            Return Me.ToSingle(Nothing)
         Case TypeCode.String
            Return Me.ToString(Nothing)
         Case TypeCode.UInt16
            Return Me.ToUInt16(Nothing)
         Case TypeCode.UInt32
            Return Me.ToUInt32(Nothing)
         Case TypeCode.UInt64
            Return Me.ToUInt64(Nothing)   
         Case Else
            Throw New InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name))   
            
      End Select
   End Function
   
   Public Function ToUInt16(provider As IFormatProvider) As UInt16 _
                   Implements IConvertible.ToUInt16
      If signBit = signBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt16 type.", _
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)))
      Else
         Return Convert.ToUInt16(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function

   Public Function ToUInt32(provider As IFormatProvider) As UInt32 _
                   Implements IConvertible.ToUInt32
      If signBit = signBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt32 type.", _
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)))
      Else
         Return Convert.ToUInt32(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
   Public Function ToUInt64(provider As IFormatProvider) As UInt64 _
                   Implements IConvertible.ToUInt64
      If signBit = signBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt64 type.", _
                                                   SByte.Parse(byteString, NumberStyles.HexNumber)))
      Else
         Return Convert.ToUInt64(Byte.Parse(byteString, NumberStyles.HexNumber))
      End If   
   End Function
   
End Structure

以下範例實例化多個 ByteString 物件，並呼叫 ToByte(Object, IFormatProvider) 方法將其轉換為位元組值。 它說明了該 ToByte(Object, IFormatProvider) 方法會將呼叫包裹到 IConvertible.ToByte 要轉換物件的方法。

public class Class1
{
   public static void Main()
   {
      byte positiveByte = 216;
      sbyte negativeByte = -101;

      ByteString3 positiveString = new ByteString3();
      positiveString.Sign = (SignBit) Math.Sign(positiveByte);
      positiveString.Value = positiveByte.ToString("X2");

      ByteString3 negativeString = new ByteString3();
      negativeString.Sign = (SignBit) Math.Sign(negativeByte);
      negativeString.Value = negativeByte.ToString("X2");

      try {
         Console.WriteLine("'{0}' converts to {1}.", positiveString.Value, Convert.ToByte(positiveString));
      }
      catch (OverflowException) {
         Console.WriteLine("0x{0} is outside the range of the Byte type.", positiveString.Value);
      }

      try {
         Console.WriteLine("'{0}' converts to {1}.", negativeString.Value, Convert.ToByte(negativeString));
      }
      catch (OverflowException) {
         Console.WriteLine("0x{0} is outside the range of the Byte type.", negativeString.Value);
      }
   }
}
// The example displays the following output:
//       'D8' converts to 216.
//       0x9B is outside the range of the Byte type.

let positiveByte = 216uy
let negativeByte = -101y

let mutable positiveString = ByteString()
positiveString.Sign <- Math.Sign positiveByte |> enum
positiveString.Value <- positiveByte.ToString "X2"

let mutable negativeString = ByteString()
negativeString.Sign <- Math.Sign negativeByte |> enum
negativeString.Value <- negativeByte.ToString "X2"

try
    printfn $"'{positiveString.Value}' converts to {Convert.ToByte positiveString}."
with :? OverflowException ->
    printfn $"0x{positiveString.Value} is outside the range of the Byte type."

try
    printfn $"'{negativeString.Value}' converts to {Convert.ToByte negativeString}."
with :? OverflowException ->
    printfn $"0x{negativeString.Value} is outside the range of the Byte type."

// The example displays the following output:
//       'D8' converts to 216.
//       0x9B is outside the range of the Byte type.

Module modMain
   Public Sub Main()
      Dim positiveByte As Byte = 216
      Dim negativeByte As SByte = -101
      
      
      Dim positiveString As New ByteString()
      positiveString.Sign = CType(Math.Sign(positiveByte), SignBit)
      positiveString.Value = positiveByte.ToString("X2")
      
      Dim negativeString As New ByteString()
      negativeString.Sign = CType(Math.Sign(negativeByte), SignBit)
      negativeString.Value = negativeByte.ToString("X2")
      
      Try
         Console.WriteLine("'{0}' converts to {1}.", positiveString.Value, Convert.ToByte(positiveString))
      Catch e As OverflowException
         Console.WriteLine("0x{0} is outside the range of the Byte type.", positiveString.Value)
      End Try

      Try
         Console.WriteLine("'{0}' converts to {1}.", negativeString.Value, Convert.ToByte(negativeString))
      Catch e As OverflowException
         Console.WriteLine("0x{0} is outside the range of the Byte type.", negativeString.Value)
      End Try   
   End Sub
End Module
' The example dosplays the following output:
'       'D8' converts to 216.
'       0x9B is outside the range of the Byte type.

備註

provider 使用者能指定關於 內容 value的文化專屬轉換資訊。 基礎型別 provider忽略;但若 value 是實作 IConvertible 介面的使用者定義型別，則可使用此參數。

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::String ^ value, IFormatProvider ^ provider);

public static byte ToByte(string value, IFormatProvider provider);

public static byte ToByte(string? value, IFormatProvider? provider);

static member ToByte : string * IFormatProvider -> byte

Public Shared Function ToByte (value As String, provider As IFormatProvider) As Byte

參數

傳回

一個 8 位元無符號整數，等價value於 ，或當 為 value時 則為零。null

例外狀況

範例

以下範例建立一個自訂 NumberFormatInfo 物件，將正號定義為「pos」，負號為「neg」，並用於呼叫方法 ToByte(String, IFormatProvider) 。 接著它會反覆呼叫該 ToByte(String, IFormatProvider) 方法，將字串陣列中的每個元素轉換成一個 Byte 值。

using System;
using System.Globalization;

public class Example4
{
   public static void Main()
   {
      // Create a NumberFormatInfo object and set several of its
      // properties that apply to unsigned bytes.
      NumberFormatInfo provider = new NumberFormatInfo();

      // These properties affect the conversion.
      provider.PositiveSign = "pos ";
      provider.NegativeSign = "neg ";

      // This property does not affect the conversion.
      // The input string cannot have a decimal separator.
      provider.NumberDecimalSeparator = ".";

      // Define an array of numeric strings.
      string[] numericStrings = { "234", "+234", "pos 234", "234.", "255",
                                  "256", "-1" };

      foreach (string numericString in numericStrings)
      {
         Console.Write("'{0,-8}' ->   ", numericString);
         try {
            byte number = Convert.ToByte(numericString, provider);
            Console.WriteLine(number);
         }
         catch (FormatException) {
            Console.WriteLine("Incorrect Format");
         }
         catch (OverflowException) {
            Console.WriteLine("Overflows a Byte");
         }
      }
   }
}
// The example displays the following output:
//       '234     ' ->   234
//       '+234    ' ->   Incorrect Format
//       'pos 234 ' ->   234
//       '234.    ' ->   Incorrect Format
//       '255     ' ->   255
//       '256     ' ->   Overflows a Byte
//       '-1      ' ->   Incorrect Format

open System
open System.Globalization

// Create a NumberFormatInfo object and set several of its
// properties that apply to unsigned bytes.
let provider = NumberFormatInfo()

// These properties affect the conversion.
provider.PositiveSign <- "pos "
provider.NegativeSign <- "neg "

// This property does not affect the conversion.
// The input string cannot have a decimal separator.
provider.NumberDecimalSeparator <- "."

// Define an array of numeric strings.
let numericStrings = 
    [| "234"; "+234"; "pos 234"
       "234."; "255"; "256"; "-1" |]

for numericString in numericStrings do
    printf $"'{numericString,-8}' ->   "
    try
        let number = Convert.ToByte(numericString, provider)
        printfn $"{number}"
    with
    | :? FormatException ->
        printfn "Incorrect Format"
    | :? OverflowException ->
        printfn "Overflows a Byte"

// The example displays the following output:
//       '234     ' ->   234
//       '+234    ' ->   Incorrect Format
//       'pos 234 ' ->   234
//       '234.    ' ->   Incorrect Format
//       '255     ' ->   255
//       '256     ' ->   Overflows a Byte
//       '-1      ' ->   Incorrect Format

Imports System.Globalization

Module Example
   Public Sub Main()
      ' Create a NumberFormatInfo object and set several of its
      ' properties that apply to unsigned bytes.
      Dim provider As New NumberFormatInfo()
      With provider 
         ' These properties affect the conversion.
         .PositiveSign = "pos "
         .NegativeSign = "neg "

         ' This property does not affect the conversion.
         ' The input string cannot have a decimal separator.
         .NumberDecimalSeparator = "."
      End With
      
      ' Define an array of numeric strings.
      Dim numericStrings() As String = { "234", "+234", "pos 234", "234.", _
                                         "255", "256", "-1" }

      For Each numericString As String In numericStrings
         Console.Write("'{0,-8}' ->   ", numericString)
         Try
            Dim number As Byte = Convert.ToByte(numericString, provider)
            Console.WriteLine(number)
         Catch ex As FormatException
            Console.WriteLine("Incorrect Format")                          
         Catch ex As OverflowException
            Console.WriteLine("Overflows a Byte")
         End Try   
      Next
   End Sub   
End Module 
' The example displays the following output:
'       '234     ' ->   234
'       '+234    ' ->   Incorrect Format
'       'pos 234 ' ->   234
'       '234.    ' ->   Incorrect Format
'       '255     ' ->   255
'       '256     ' ->   Overflows a Byte
'       '-1      ' ->   Incorrect Format

備註

provider 是一個 IFormatProvider 獲得物件 NumberFormatInfo 的實例。 該 NumberFormatInfo 物件提供關於 格式 value的文化特定資訊。 若provider為 ，nullNumberFormatInfo則使用 當前文化的物件。

如果你不想在轉換失敗時處理例外，可以直接呼叫該 Byte.TryParse 方法。 它會回傳 Boolean 一個值，表示轉換是否成功。

另請參閱

• Parse(String)

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(float value);

public static byte ToByte(float value);

static member ToByte : single -> byte

Public Shared Function ToByte (value As Single) As Byte

參數

傳回

value，四捨五入到最近的8位元無符號整數。 若 value 介於兩個整數的中間，則返回偶數;也就是說，4.5 轉換成 4,5.5 轉換成 6。

例外狀況

範例

以下範例將一個 Single 值 Byte轉換為 。

public void ConvertByteSingle(byte byteVal) {
    float floatVal;

    // Byte to float conversion will not overflow.
    floatVal = System.Convert.ToSingle(byteVal);
    System.Console.WriteLine("The byte as a float is {0}.",
        floatVal);

    // Float to byte conversion can overflow.
    try {
        byteVal = System.Convert.ToByte(floatVal);
        System.Console.WriteLine("The float as a byte is {0}.",
            byteVal);
    }
    catch (System.OverflowException) {
        System.Console.WriteLine(
            "The float value is too large for a byte.");
    }
}

let convertByteSingle (byteVal: byte) =
    // Byte to float conversion will not overflow.
    let floatVal = Convert.ToSingle byteVal
    printfn $"The byte as a float is {floatVal}."

    // Float to byte conversion can overflow.
    try
        let byteVal = Convert.ToByte floatVal
        printfn $"The float as a byte is {byteVal}."
    with :? OverflowException ->
        printfn "The float value is too large for a byte."

Public Sub ConvertByteSingle(ByVal byteVal As Byte)
    Dim singleVal As Single

    ' Byte to float conversion will not overflow.
    singleVal = System.Convert.ToSingle(byteVal)
    System.Console.WriteLine("The byte as a single is {0}.", _
                              singleVal)

    ' Single to byte conversion can overflow.
    Try
        byteVal = System.Convert.ToByte(singleVal)
        System.Console.WriteLine("The single as a byte is {0}.", _
                                  byteVal)
    Catch exception As System.OverflowException
        System.Console.WriteLine( _
            "Overflow in single-to-byte conversion.")
    End Try
End Sub

另請參閱

• Round

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::UInt64 value);

[System.CLSCompliant(false)]
public static byte ToByte(ulong value);

[<System.CLSCompliant(false)>]
static member ToByte : uint64 -> byte

Public Shared Function ToByte (value As ULong) As Byte

參數

傳回

一個 8 位元無符號整數，等價 value於 。

屬性

CLSCompliantAttribute

例外狀況

範例

以下範例將一組無符號長整數陣列轉換為 Byte 值。

ulong[] numbers= { UInt64.MinValue, 121, 340, UInt64.MaxValue };
byte result;
foreach (ulong number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException)
   {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       Converted the UInt64 value 0 to the Byte value 0.
//       Converted the UInt64 value 121 to the Byte value 121.
//       The UInt64 value 340 is outside the range of the Byte type.
//       The UInt64 value 18446744073709551615 is outside the range of the Byte type.

let numbers= [| UInt64.MinValue; 121uL; 340uL; UInt64.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       Converted the UInt64 value 0 to the Byte value 0.
//       Converted the UInt64 value 121 to the Byte value 121.
//       The UInt64 value 340 is outside the range of the Byte type.
//       The UInt64 value 18446744073709551615 is outside the range of the Byte type.

Dim numbers() As ULong = { UInt64.MinValue, 121, 340, UInt64.MaxValue }
Dim result As Byte
For Each number As ULong In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       Converted the UInt64 value 0 to the Byte value 0.
'       Converted the UInt64 value 121 to the Byte value 121.
'       The UInt64 value 340 is outside the range of the Byte type.
'       The UInt64 value 18446744073709551615 is outside the range of the Byte type.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::SByte value);

[System.CLSCompliant(false)]
public static byte ToByte(sbyte value);

[<System.CLSCompliant(false)>]
static member ToByte : sbyte -> byte

Public Shared Function ToByte (value As SByte) As Byte

參數

傳回

一個 8 位元無符號整數，等價 value於 。

屬性

CLSCompliantAttribute

例外狀況

範例

以下範例將一組 SByte 數值 Byte 轉換為數值。

sbyte[] numbers = { SByte.MinValue, -1, 0, 10, SByte.MaxValue };
byte result;
foreach (sbyte number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException)
   {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       The SByte value -128 is outside the range of the Byte type.
//       The SByte value -1 is outside the range of the Byte type.
//       Converted the SByte value 0 to the Byte value 0.
//       Converted the SByte value 10 to the Byte value 10.
//       Converted the SByte value 127 to the Byte value 127.

let numbers = [| SByte.MinValue; -1y; 0y; 10y; SByte.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       The SByte value -128 is outside the range of the Byte type.
//       The SByte value -1 is outside the range of the Byte type.
//       Converted the SByte value 0 to the Byte value 0.
//       Converted the SByte value 10 to the Byte value 10.
//       Converted the SByte value 127 to the Byte value 127.

Dim numbers() As SByte = { SByte.MinValue, -1, 0, 10, SByte.MaxValue }
Dim result As Byte
For Each number As SByte In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       The SByte value -128 is outside the range of the Byte type.
'       The SByte value -1 is outside the range of the Byte type.
'       Converted the SByte value 0 to the Byte value 0.
'       Converted the SByte value 10 to the Byte value 10.
'       Converted the SByte value 127 to the Byte value 127.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(char value);

public static byte ToByte(char value);

static member ToByte : char -> byte

Public Shared Function ToByte (value As Char) As Byte

參數

傳回

一個 8 位元無符號整數，等價 value於 。

例外狀況

範例

以下範例將一組 Char 數值 Byte 轉換為數值。

char[] chars = { 'a', 'z', '\x0007', '\x03FF' };
foreach (char ch in chars)
{
   try {
      byte result = Convert.ToByte(ch);
      Console.WriteLine("{0} is converted to {1}.", ch, result);
   }
   catch (OverflowException) {
      Console.WriteLine("Unable to convert u+{0} to a byte.",
                        Convert.ToInt16(ch).ToString("X4"));
   }
}
// The example displays the following output:
//       a is converted to 97.
//       z is converted to 122.
//        is converted to 7.
//       Unable to convert u+03FF to a byte.

let chars = [| 'a'; 'z'; '\u0007'; '\u03FF' |]
for ch in chars do
    try
        let result = Convert.ToByte ch
        printfn $"{ch} is converted to {result}."
    with :? OverflowException ->
        printfn $"Unable to convert u+{Convert.ToInt16 ch:X4} to a byte."
// The example displays the following output:
//       a is converted to 97.
//       z is converted to 122.
//        is converted to 7.
//       Unable to convert u+03FF to a byte.

Dim chars() As Char = { "a"c, "z"c, ChrW(7), ChrW(1023) }
For Each ch As Char in chars
   Try
      Dim result As Byte = Convert.ToByte(ch)
      Console.WriteLine("{0} is converted to {1}.", ch, result)
   Catch e As OverflowException
      Console.WriteLIne("Unable to convert u+{0} to a byte.", _
                        AscW(ch).ToString("X4"))
   End Try
Next   
' The example displays the following output:
'       a is converted to 97.
'       z is converted to 122.
'        is converted to 7.
'       Unable to convert u+03FF to a byte.

備註

此方法回傳一個無符號位元組值，代表傳遞至該物件的 Char 數值程式碼。 在.NET中，Char 物件是一個 16 位元的值。 這表示此方法適用於返回 ASCII 字元區間或 Unicode C0 控制項與基本拉丁字母區間，以及 C1 控制項與 Latin-1 補充區間（U+0000 至 U+00FF）的數字碼。

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(long value);

public static byte ToByte(long value);

static member ToByte : int64 -> byte

Public Shared Function ToByte (value As Long) As Byte

參數

傳回

一個 8 位元無符號整數，等價 value於 。

例外狀況

範例

以下範例將一組 Int64 數值 Byte 轉換為數值。

long[] numbers = { Int64.MinValue, -1, 0, 121, 340, Int64.MaxValue };
byte result;
foreach (long number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       The Int64 value -9223372036854775808 is outside the range of the Byte type.
//       The Int64 value -1 is outside the range of the Byte type.
//       Converted the Int64 value 0 to the Byte value 0.
//       Converted the Int64 value 121 to the Byte value 121.
//       The Int64 value 340 is outside the range of the Byte type.
//       The Int64 value 9223372036854775807 is outside the range of the Byte type.

let numbers = [| Int64.MinValue; -1L; 0L; 121L; 34L; Int64.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       The Int64 value -9223372036854775808 is outside the range of the Byte type.
//       The Int64 value -1 is outside the range of the Byte type.
//       Converted the Int64 value 0 to the Byte value 0.
//       Converted the Int64 value 121 to the Byte value 121.
//       The Int64 value 340 is outside the range of the Byte type.
//       The Int64 value 9223372036854775807 is outside the range of the Byte type.

Dim numbers() As Long = { Int64.MinValue, -1, 0, 121, 340, Int64.MaxValue }
Dim result As Byte
For Each number As Long In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       The Int64 value -9223372036854775808 is outside the range of the Byte type.
'       The Int64 value -1 is outside the range of the Byte type.
'       Converted the Int64 value 0 to the Byte value 0.
'       Converted the Int64 value 121 to the Byte value 121.
'       The Int64 value 340 is outside the range of the Byte type.
'       The Int64 value 9223372036854775807 is outside the range of the Byte type.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::Byte value);

public static byte ToByte(byte value);

static member ToByte : byte -> byte

Public Shared Function ToByte (value As Byte) As Byte

參數

傳回

value 未改變地返回。

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(DateTime value);

public static byte ToByte(DateTime value);

static member ToByte : DateTime -> byte

Public Shared Function ToByte (value As DateTime) As Byte

參數

傳回

此轉換不被支援。 沒有任何價值回傳。

例外狀況

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::Decimal value);

public static byte ToByte(decimal value);

static member ToByte : decimal -> byte

Public Shared Function ToByte (value As Decimal) As Byte

參數

傳回

value，四捨五入到最近的8位元無符號整數。 若 value 介於兩個整數的中間，則返回偶數;也就是說，4.5 轉換成 4,5.5 轉換成 6。

例外狀況

備註

以下範例將一個 Byte 值轉換為 ， Decimal 一個 Decimal 值 Byte轉換為 。

public void ConvertByteDecimal(byte byteVal) {
    decimal decimalVal;

    // Byte to decimal conversion will not overflow.
    decimalVal = System.Convert.ToDecimal(byteVal);
    System.Console.WriteLine("The byte as a decimal is {0}.",
        decimalVal);

    // Decimal to byte conversion can overflow.
    try {
        byteVal = System.Convert.ToByte(decimalVal);
        System.Console.WriteLine("The Decimal as a byte is {0}.",
            byteVal);
    }
    catch (System.OverflowException) {
        System.Console.WriteLine(
            "The decimal value is too large for a byte.");
    }
}

let convertByteDecimal (byteVal: byte) =
    // Byte to decimal conversion will not overflow.
    let decimalVal = Convert.ToDecimal byteVal
    printfn $"The byte as a decimal is {decimalVal}."

    // Decimal to byte conversion can overflow.
    try
        let byteVal = Convert.ToByte decimalVal
        printfn $"The Decimal as a byte is {byteVal}."
    with :? OverflowException ->
        printfn "The decimal value is too large for a byte."

Public Sub ConvertByteDecimal(ByVal byteVal As Byte)
    Dim decimalVal As Decimal

    ' Byte to decimal conversion will not overflow.
    decimalVal = System.Convert.ToDecimal(byteVal)
    System.Console.WriteLine("The byte as a decimal is {0}.", _
                              decimalVal)

    ' Decimal to byte conversion can overflow.
    Try
        byteVal = System.Convert.ToByte(decimalVal)
        System.Console.WriteLine("The Decimal as a byte is {0}.", _
                                  byteVal)
    Catch exception As System.OverflowException
        System.Console.WriteLine( _
            "Overflow in decimal-to-byte conversion.")
    End Try
End Sub

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(bool value);

public static byte ToByte(bool value);

static member ToByte : bool -> byte

Public Shared Function ToByte (value As Boolean) As Byte

參數

傳回

若為 valuetrue1，則為 0。

範例

以下範例說明將 轉換為 BooleanByte 的過程。

bool falseFlag = false;
bool trueFlag = true;

Console.WriteLine("{0} converts to {1}.", falseFlag,
                  Convert.ToByte(falseFlag));
Console.WriteLine("{0} converts to {1}.", trueFlag,
                  Convert.ToByte(trueFlag));
// The example displays the following output:
//       False converts to 0.
//       True converts to 1.

let falseFlag = false
let trueFlag = true

printfn $"{falseFlag} converts to {Convert.ToByte falseFlag}."
printfn $"{trueFlag} converts to {Convert.ToByte trueFlag}."
// The example displays the following output:
//       False converts to 0.
//       True converts to 1.

Dim falseFlag As Boolean = False
Dim trueFlag As Boolean = True

Console.WriteLine("{0} converts to {1}.", falseFlag, _
                  Convert.ToByte(falseFlag))
Console.WriteLine("{0} converts to {1}.", trueFlag, _
                  Convert.ToByte(trueFlag))
' The example displays the following output:
'       False converts to 0.
'       True converts to 1.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(short value);

public static byte ToByte(short value);

static member ToByte : int16 -> byte

Public Shared Function ToByte (value As Short) As Byte

參數

傳回

一個 8 位元無符號整數，等價 value於 。

例外狀況

範例

以下範例將一組 Int16 數值 Byte 轉換為數值。

short[] numbers = { Int16.MinValue, -1, 0, 121, 340, Int16.MaxValue };
byte result;
foreach (short number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       The Int16 value -32768 is outside the range of the Byte type.
//       The Int16 value -1 is outside the range of the Byte type.
//       Converted the Int16 value 0 to the Byte value 0.
//       Converted the Int16 value 121 to the Byte value 121.
//       The Int16 value 340 is outside the range of the Byte type.
//       The Int16 value 32767 is outside the range of the Byte type.

let numbers = [| Int16.MinValue; -1s; 0s; 121s; 340s; Int16.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       The Int16 value -32768 is outside the range of the Byte type.
//       The Int16 value -1 is outside the range of the Byte type.
//       Converted the Int16 value 0 to the Byte value 0.
//       Converted the Int16 value 121 to the Byte value 121.
//       The Int16 value 340 is outside the range of the Byte type.
//       The Int16 value 32767 is outside the range of the Byte type.

Dim numbers() As Short = { Int16.MinValue, -1, 0, 121, 340, Int16.MaxValue }
Dim result As Byte
For Each number As Short In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       The Int16 value -32768 is outside the range of the Byte type.
'       The Int16 value -1 is outside the range of the Byte type.
'       Converted the Int16 value 0 to the Byte value 0.
'       Converted the Int16 value 121 to the Byte value 121.
'       The Int16 value 340 is outside the range of the Byte type.
'       The Int16 value 32767 is outside the range of the Byte type.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(int value);

public static byte ToByte(int value);

static member ToByte : int -> byte

Public Shared Function ToByte (value As Integer) As Byte

參數

傳回

一個 8 位元無符號整數，等價 value於 。

例外狀況

範例

以下範例將一組 Int32 數值 Byte 轉換為數值。

int[] numbers = { Int32.MinValue, -1, 0, 121, 340, Int32.MaxValue };
byte result;
foreach (int number in numbers)
{
   try {
      result = Convert.ToByte(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//       The Int32 value -2147483648 is outside the range of the Byte type.
//       The Int32 value -1 is outside the range of the Byte type.
//       Converted the Int32 value 0 to the Byte value 0.
//       Converted the Int32 value 121 to the Byte value 121.
//       The Int32 value 340 is outside the range of the Byte type.
//       The Int32 value 2147483647 is outside the range of the Byte type.

let numbers = [| Int32.MinValue; -1; 0; 121; 340; Int32.MaxValue |]
for number in numbers do
    try
        let result = Convert.ToByte number
        printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the Byte type."
// The example displays the following output:
//       The Int32 value -2147483648 is outside the range of the Byte type.
//       The Int32 value -1 is outside the range of the Byte type.
//       Converted the Int32 value 0 to the Byte value 0.
//       Converted the Int32 value 121 to the Byte value 121.
//       The Int32 value 340 is outside the range of the Byte type.
//       The Int32 value 2147483647 is outside the range of the Byte type.

Dim numbers() As Integer = { Int32.MinValue, -1, 0, 121, 340, Int32.MaxValue }
Dim result As Byte
For Each number As Integer In numbers
   Try
      result = Convert.ToByte(number)
      Console.WriteLIne("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'       The Int32 value -2147483648 is outside the range of the Byte type.
'       The Int32 value -1 is outside the range of the Byte type.
'       Converted the Int32 value 0 to the Byte value 0.
'       Converted the Int32 value 121 to the Byte value 121.
'       The Int32 value 340 is outside the range of the Byte type.
'       The Int32 value 2147483647 is outside the range of the Byte type.

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(double value);

public static byte ToByte(double value);

static member ToByte : double -> byte

Public Shared Function ToByte (value As Double) As Byte

參數

傳回

value，四捨五入到最近的8位元無符號整數。 若 value 介於兩個整數的中間，則返回偶數;也就是說，4.5 轉換成 4,5.5 轉換成 6。

例外狀況

範例

以下範例將一個 Byte 值轉換為 ， Double 一個 Double 值 Byte轉換為 。

public void ConvertDoubleByte(double doubleVal) {
    byte	byteVal = 0;

    // Double to byte conversion can overflow.
    try {
        byteVal = System.Convert.ToByte(doubleVal);
        System.Console.WriteLine("{0} as a byte is: {1}.",
            doubleVal, byteVal);
    }
    catch (System.OverflowException) {
        System.Console.WriteLine(
            "Overflow in double-to-byte conversion.");
    }

    // Byte to double conversion cannot overflow.
    doubleVal = System.Convert.ToDouble(byteVal);
    System.Console.WriteLine("{0} as a double is: {1}.",
        byteVal, doubleVal);
}

let convertDoubleByte (doubleVal: float) =
    // Double to byte conversion can overflow.
    try
        let byteVal = Convert.ToByte doubleVal
        printfn $"{doubleVal} as a byte is: {byteVal}."
        
        // Byte to double conversion cannot overflow.
        let doubleVal = Convert.ToDouble byteVal
        printfn $"{byteVal} as a double is: {doubleVal}."
    with :? OverflowException ->
        printfn "Overflow in double-to-byte conversion."

Public Sub ConvertDoubleByte(ByVal doubleVal As Double)
    Dim byteVal As Byte = 0

    ' Double to Byte conversion can overflow.
    Try
        byteVal = System.Convert.ToByte(doubleVal)
        System.Console.WriteLine("{0} as a Byte is: {1}.", _
            doubleVal, byteVal)
    Catch exception As System.OverflowException
        System.Console.WriteLine( _
            "Overflow in Double-to-Byte conversion.")
    End Try

    ' Byte to Double conversion cannot overflow.
    doubleVal = System.Convert.ToDouble(byteVal)
    System.Console.WriteLine("{0} as a Double is: {1}.", _
                              byteVal, doubleVal)
End Sub

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

來源:

Convert.cs

public:
 static System::Byte ToByte(System::Object ^ value);

public static byte ToByte(object value);

public static byte ToByte(object? value);

static member ToByte : obj -> byte

Public Shared Function ToByte (value As Object) As Byte

參數

傳回

一個 8 位元無符號整數，等價value於 ，或當 為 value時 則為零。null

例外狀況

範例

以下範例使用此 ToByte(Object) 方法將物件 Byte 陣列轉換為數值。

object[] values = { true, -12, 163, 935, 'x', "104", "103.0", "-1",
                    "1.00e2", "One", 1.00e2};
byte result;
foreach (object value in values)
{
   try {
      result = Convert.ToByte(value);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        value.GetType().Name, value,
                        result.GetType().Name, result);
   }
   catch (OverflowException)
   {
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.",
                        value.GetType().Name, value);
   }
   catch (FormatException)
   {
      Console.WriteLine("The {0} value {1} is not in a recognizable format.",
                        value.GetType().Name, value);
   }
   catch (InvalidCastException)
   {
      Console.WriteLine("No conversion to a Byte exists for the {0} value {1}.",
                        value.GetType().Name, value);
   }
}
// The example displays the following output:
//       Converted the Boolean value True to the Byte value 1.
//       The Int32 value -12 is outside the range of the Byte type.
//       Converted the Int32 value 163 to the Byte value 163.
//       The Int32 value 935 is outside the range of the Byte type.
//       Converted the Char value x to the Byte value 120.
//       Converted the String value 104 to the Byte value 104.
//       The String value 103.0 is not in a recognizable format.
//       The String value -1 is outside the range of the Byte type.
//       The String value 1.00e2 is not in a recognizable format.
//       The String value One is not in a recognizable format.
//       Converted the Double value 100 to the Byte value 100.

let values: obj[] = 
    [| true; -12; 163; 935; 'x'; "104"; "103.0" 
       "-1"; "1.00e2"; "One"; 1.00e2 |]
for value in values do
    try
        let result = Convert.ToByte value
        printfn $"Converted the {value.GetType().Name} value {value} to the {result.GetType().Name} value {result}."
    with
    | :? OverflowException ->
        printfn $"The {value.GetType().Name} value {value} is outside the range of the Byte type."
    | :? FormatException ->
        printfn $"The {value.GetType().Name} value {value} is not in a recognizable format."
    | :? InvalidCastException ->
        printfn $"No conversion to a Byte exists for the {value.GetType().Name} value {value}."
// The example displays the following output:
//       Converted the Boolean value True to the Byte value 1.
//       The Int32 value -12 is outside the range of the Byte type.
//       Converted the Int32 value 163 to the Byte value 163.
//       The Int32 value 935 is outside the range of the Byte type.
//       Converted the Char value x to the Byte value 120.
//       Converted the String value 104 to the Byte value 104.
//       The String value 103.0 is not in a recognizable format.
//       The String value -1 is outside the range of the Byte type.
//       The String value 1.00e2 is not in a recognizable format.
//       The String value One is not in a recognizable format.
//       Converted the Double value 100 to the Byte value 100.

Dim values() As Object = { True, -12, 163, 935, "x"c, "104", "103.0", "-1", _
                           "1.00e2", "One", 1.00e2}
Dim result As Byte
For Each value As Object In values
   Try
      result = Convert.ToByte(value)
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                        value.GetType().Name, value, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the Byte type.", _
                        value.GetType().Name, value)
   Catch e As FormatException
      Console.WriteLine("The {0} value {1} is not in a recognizable format.", _
                        value.GetType().Name, value)
   Catch e As InvalidCastException
      Console.WriteLine("No conversion to a Byte exists for the {0} value {1}.", _
                        value.GetType().Name, value)
                        
   End Try
Next                           
' The example displays the following output:
'       Converted the Boolean value True to the Byte value 1.
'       The Int32 value -12 is outside the range of the Byte type.
'       Converted the Int32 value 163 to the Byte value 163.
'       The Int32 value 935 is outside the range of the Byte type.
'       Converted the Char value x to the Byte value 120.
'       Converted the String value 104 to the Byte value 104.
'       The String value 103.0 is not in a recognizable format.
'       The String value -1 is outside the range of the Byte type.
'       The String value 1.00e2 is not in a recognizable format.
'       The String value One is not in a recognizable format.
'       Converted the Double value 100 to the Byte value 100.

備註

若 value 不是 null，此方法將呼叫 包繞至 IConvertible.ToByte 底層類型 value的實作。